Bedienungsanleitung Batavia BT-CM001 - 7063459 (Seite 6 von 20) (Deutsch, Englisch, Holländisch, Französisch)

758254

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

English

3. Before rst use

Remove the machine and the accessories

from the packaging. Check the machine for

transport damage and do not use the

machine in case of damages. Keep the

packing materials away from children, risk

of suffocation!

4. Contents of packing

1× Universal cordless mixer

1× Quick coupler

2× Flange spanners

1× Universal mixing paddle

1× Operating instructions

5. Intended use

The mixer has been designed for private use

only. It has not been designed for operation

in industry. With the supplied mixing paddle

the electric mixer is suitable for mixing

low-viscosity emulsions and viscous mate-

rials, for example: paints, lacquer, adhesives,

mortar, etc.

6. Operation

a. Firmly hold the electric mixer with both

hands.

b. Press safety button (7) and the ON/OFF

switch (8) with one hand. When the

device is operating there is no need to

hold down the safety switch.

Note: If the on / off switch is pressed lightly,

the mixer will run at the lowest speed. If the

on/offswitchispressedrmly,themixer

will run at the highest speed.

c. To switch off the device, release the

ON/OFF switch (8).

7. Gear selection

The mixer is equipped with an electronic

speed regulator and with a 2-gear drive. Use

the gear selection switch (4) to select one

of the two available gear speeds. The mixer

must have come to a complete standstill

before the gears are changed.

8. Inserting the agitator

Always remove the battery before inserting

or exchanging the agitator. The mixer is

equipped with a M 14 collet.

a. Screw the quick coupler (2) onto the

shaft (3) by turning counter clockwise.

b. Fix it by using the 2 supplied open-end

spanners. Turn the spanners to each

othersothatthequickcouplerisrmly

xedinthetoolcarrier.Toremovethe

quick coupler, put the wrench back in

and pull them away from each other.

c. Draw back the locking sleeve on the

quick coupler to insert the agitator (1).

Push forward the locking sleeve to lock

the agitator in place.

9. Cleaning and maintenance

WARNING: Remove the battery before car-

rying out any maintenance/cleaning of the

tool.

9.1 Cleaning

• Use only a moist cloth to clean the unit.

Do not use aggressive chemicals which

may dissolve plastic parts, or abrasives.

Always keep the ventilation slots clean

and free from obstructions.

• Keep safety devices, ventilation open-

ings and the motor housing as free as

possible from dirt and dust. Rub the

electric power tool with a clean cloth or

blow over it with low pressure com-

pressed air.

• We recommend that you clean your

electric power tool immediately after

each use.

• Clean the electric power tool regularly

with a damp cloth and somewhat soft

soap.

9.2 Maintenance

There are no inner parts of the tool which

need maintenance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Batavia BT-CM001 - 7063459 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info