Bedienungsanleitung Batavia BT-CS009 - 7063376 (Seite 29 von 66) (Deutsch, Englisch, Holländisch, Französisch)

759584

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

English

4. Clean the ange and install a new tool

insert. Pay attention to the direction of

motion (check the arrows on the housing

and on the tool insert).

5. Tighten the clamping screws, anticlock-

wise, to secure the tool insert, ensuring

that the tool insert is concentric.

6. Before you operate the on/off switch,

make sure that the tool insert is correctly

installed, that the moving parts are free

and the clamping screws are rmly

tightened.

Attention! The Allen key (16) must not be

left inserted in the clamping screw.

Note: After installing or changing a tool insert,

allow the electric power tool to run for the rst

minute without any load, in order to make sure

that the tool insert is correctly seated.

Extraction of dust and splinters

(Figure 5)

Attention! When working with items coated in

leadcontaining paint, for example, or with

some types of wood, harmful or poisonous

dust particles may be generated. This presents

a danger both for the user and for other people

nearby. Protect yourself with suitable personal

safety clothing and equipment and keep other

people away from the working area. Connect

an extraction system or a vacuum cleaner to

the electric power tool. This will provide you

with optimum extraction of dust and splinters

from the workpiece.

Advantages: You preserve both the electric

power tool and your health. Moreover, you’re

working area remains clean and safe.

1. Connect the suction hose (13) to the dust

extraction connection (10).

2. Make sure that the seal inside the smaller

of the connecting pieces on the hose (13)

ts on to the dust extraction connection

(10).

3. Turn the suction hose to the right until it

engages.

4. Attach a suitable dust extraction device.

5. Before each use, ensure that the lid (13a)

is attached to the adapter (13b).

Notes:

• Make sure that the vacuum cleaner is

suitable for use with the electric power

tool. Most dry vacuum cleaners for

domestic use are well suited to this

purpose.

• The vacuum cleaner is particularly useful if

many cuts are being performed succes-

sively. It means that less frequent stops

are required to clean the electric power

tool and the workplace.

• When you are cutting materials which may

produce dangerous dust, always use a

vacuum cleaner. This applies, in particular,

to hardwoods, MDF sheets and ceramics.

Setting the cutting depth (Figure 6)

1. Loosen the adjustment screw (2).

2. Adjust the cutting depth according to the

scale (a) and tighten the adjustment screw

(2).

3. For wood and plastics, the cutting depth

should be selected to be a little deeper

than the material thickness.

4. A wood underlay can be used to achieve a

better cutting quality. The wood underlay

will, however, be damaged.

Connection to the power supply

Make absolutely sure, before connecting, that

the data on the nameplate agrees with the

mains power supply data. Always pull out the

power plug before making adjustments to the

electric power tool.

Note

ATTENTION!

• Before undertaking any work on the elec-

tric power tool, unplug it from the mains!

• Do not use tool inserts which are defective

or which exhibit tears or ssures.

• Do not use a ange or ange nut with a

hole larger or smaller than the hole in the

tool insert.

• Only use tool inserts of the same type as

those delivered with the electric power

tool. Seek advice from a specialist trader.

OPERATION

General instructions

• Select a suitable tool insert for the material

that is to be worked on.

• Check the condition and sharpness of the

tool insert.

7062244_MaxxSaw_Ma_#1612-19.indb 27 19-12-16 10:31

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Batavia BT-CS009 - 7063376 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info