589478
14
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
charger, cable and plug. If damage is
detected, do not use the battery charger.
Never open the battery charger yourself.
Have repairs performed only by a qualied
technician and only using original spare
parts. Damaged battery chargers, cables
and plugs increase the risk of an electric
shock.
d) Do not operate the battery charger on
easily inammable surfaces (e. g., paper,
textiles, etc.) or surroundings. The
heating of the battery charger during the
charging process can pose a re hazard.
e) Supervise children. This will ensure that
children do not play with the charger.
f) Children or persons that owing to their
physical, sensory or mental limitations
or to their lack of experience or
knowledge, are not capable of securely
operating the charger, may only use this
charger under supervision or after
having been instructed by a responsible
person. Otherwise, there is danger of
operating errors and injuries.
SAFETY WARNINGS FOR SCREWDRIVER
Hold power tool by insulated gripping
surfaces, when performing an
operation where the fastener may
contact hidden wiring. Fasteners
contacting a “live” wire may make
exposed metal parts of the power tool
“live” and could give the operator an
electric shock.
Hold the machine with a rm grip. High
reaction torque can briey occur while
driving in and loosening screws.
Always wait until the machine has
come to a complete stop before
placing it down. The tool insert can jam
and lead to loss of control over the power
tool.
Before any work on the machine (e. g.,
maintenance, tool change, etc.) as
well as during transport and storage,
set the rotational direction switch to
the centre position. Unintentional
actuation of the On/Off switch can lead to
injuries.
Protect the power tool against heat,
e. g., against continuous intense
sunlight, re, water, and moisture.
Danger of explosion.
In case of damage and improper use
of the battery, vapours may be
emitted. Provide for fresh air and seek
medical help in case of
complaints. The
vapours can irritate the respiratory system.
INTENDED USE
This ash cell screwdriver has been
developed for private use. It is not designed
for the demands of industrial use.
The device is intended for driving in and
loosening screws in wood, metal, ceramic
and plastic.
The intended use also includes an operation
following the operating instructions.
Any use beyond these parameters (different
media, applying force) or any changes
(reconstruction, no original accessory) can
lead to serious risks and is regarded as use
that is contrary to the intended purpose.
Note: this charger is not suitable for
charging non-rechargeable batteries.
BEFORE FIRST USE
Remove the cordless screwdriver and the
accessory out of the packaging.
Check all parts for damage in transit and do
not use damaged accessory or a damaged
tool.
Keep packaging materials out of reach of
children. There is risk of suffocation!
CHARGING THE FLASH CELL
SCREWDRIVER
The outstanding feature of this cordless
screwdriver is very quick charging technology.
The screwdrivers ash cell already is fully
14
TM
7061166 Ma # 1201-09.indd 14 09-01-12 12:29
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Batavia BT-CSD002 DUO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info