Bedienungsanleitung Batavia BT-CT001 - 7063419 (Seite 8 von 46) (Deutsch, Englisch, Holländisch, Französisch)

758282

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

English

sharp cutting edges are less likely to

bind and are easier to control.

g. Use the power tool, accessories and

tool bits etc., in accordance with these

instructions and in the manner

intended for the particular type of

power tool, taking into account the

working conditions and the work to be

performed. Use of the power tool for

operations different from intended

could result in a hazardous situation.

2.5 Service

a. Please use a qualied expert who uses

original replacement parts to repair

your power tool. This will ensure proper

functioning of the power tool.

3. Safety warnings common for

grinding, sanding, wire brushing,

polishing, carving or abrasive

cutting-off operations

a. This power tool is intended to function

as a grinder, sander, wire brush, pol-

isher, carving or cut-off tool. Read all

safety warnings, instructions, illustra-

tions and specications provided with

this power tool. Failure to follow all

instructions listed below may result in



b. Do not use accessories which are not

specically designed and recom-

mended by the tool manufacturer. Just

because the accessory can be attached

to your power tool, it does not assure

safe operation.

c. The rated speed of the grinding acces-

sories must be at least equal to the

maximum speed marked on the power

tool. Grinding accessories running

faster than their rated speed can break



d. The outside diameter and the thick-

ness of your accessory must be within

the capacity rating of your power tool.

Incorrectly sized accessories cannot be

adequately guarded or controlled.

e. The arbour size of wheels, sanding

drums or any other accessory must

properly t the spindle or collet of the

power tool. Accessories that do not

match the mounting hardware of the

power tool will run out of balance,

vibrate excessively and may cause loss

of control.

f. Mandrel mounted wheels, sanding

drums, cutters or other accessories

must be fully inserted into the collet or

chuck.

held and/or the overhang of the wheel is

too long, the mounted wheel may

become loose and be ejected at high

velocity.

g. Do not use a damaged accessory.

Before each use inspect the accessory

such as abrasive wheels for chips and

cracks, sanding drum for cracks, tear

or excess wear, wire brush for loose or

cracked wires. If power tool or acces-

sory is dropped, inspect for damage or

install an undamaged accessory. After

inspecting and installing an acces-

sory, position yourself and bystanders

away from the plane of the rotating

accessory and run the power tool at

maximum no-load speed for one min-

ute. Damaged accessories will normally

break apart during this test time.

h. Wear personal protective equipment.

Depending on application, use face

shield, safety goggles or safety

glasses. As appropriate, wear dust

mask, hearing protectors, gloves and

workshop apron capable of stopping

small abrasive or workpiece frag-

ments. The eye protection must be

-

ated by various operations. The dust

mask or respirator must be capable of



operation. Prolonged exposure to high

intensity noise may cause hearing loss.

i. Keep bystanders a safe distance away

from work area. Anyone entering the

work area must wear personal protec-

tive equipment. Fragments of work-



away and cause injury beyond immedi-

ate area of operation.

j. Hold the power tool by insulated grip-

ping surfaces only, when performing

an operation where the cutting acces-

7062854-Compact-Tool-170W-Ma-1803-27.indb 6 14-05-18 10:20

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Batavia BT-CT001 - 7063419 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info