Bedienungsanleitung Batavia BT-DS003 - 7062852 (Seite 9 von 30) (Deutsch, Englisch, Holländisch, Französisch)

758296

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

English

• Depending on grain size there are

degrees of coarseness. The coarseness

is specied by a number on the back of

the papers. The higher the number is,

the ner the grain.

• It is important to use the right paper for

each job. For rough sanding use grain

sizes up to 80, for soft wood as larch,

pine or spruce use papers from 120 to

150. For dense hardwood as beech or

maple, the grain sizes up to 220 can be

used.

9. Attaching the sanding paper

Choose the sanding paper according to the

material being worked.

9.1 Attach the sanding paper to the sanding

plate (3) and make sure the holes on the

sanding paper t with the openings on

the base plate. Only this way the sand-

ing dust can be extracted through the

built-in dust removal in the sanding

plate.

9.2 Firmly press the sanding paper down on

the sanding plate.

10. Assembling/Disassembling/

Emptying the dust collection box

Always use the dust collection box (6) when

sanding.

10.1 Place the dust collection box onto the

provided dust collection flange (5).

Push the connection piece into the

flange and turn it clockwise until it locks

into place.

10.2 To remove the dust collection box, turn

the connection piece counter clockwise

and pull it out of the flange. Preferably

clean the dust collection box and the

exhaust connection in the housing after

each use. By doing this the dust collec-

tion box can be easily inserted and

removed.

10.3 For emptying the dust collection box,

just tap out or, if available, clean with

compressed air.

11. ON/OFF switch

11.1 After attaching the sanding paper con-

nect the multi sander to the dust extrac-

tion and to the mains power.

11.2 To turn the machine on, set the ON/OFF

switch (1) to I. To turn the machine off,

set the ON/OFF switch to O.

12. Sanding

• Apply only moderate pressure on the

machine. Too much pressure will lead

to jamming of the mechanism and will

spoil the result. Excessive pressure will

overheat the machine.

• Always select abrasive paper with

coarseness suited the condition of the

surface.

• Use ner papers in the consecutive

sanding until the desired smoothness is

reached. If you desire a very smooth

nish you may slightly moisten the

surface before the last sanding. This

will slightly swell the bres and allow a

smoother nish.

13. Cleaning and maintenance

• To avoid injury always pull the power

plug before maintaining or cleaning the

machine.

• Clean the machine with a moist cloth.

• If the machine is very dirty use a mild

detergent or soap on the cloth. Other

cleaning agents may contain chemical

substances which may damage the

plastic parts of the machine.

• Do not allow liquids to enter the

machine and do not immerse the

machine in liquids of any kind.

• Repairs, inspections of the interior of

the machine, adjustments and replace-

ment of the carbon brushes may only

be undertaken by a professional. Only

identical replacement parts may be

used! For further information please

contact our customer service

department.

• Always keep the ventilation slots (4)

open and clean. After each use remove

dirt and contaminations with a brush or

blow it out with compressed air.

7062852-Delta_Sander_130W-Ma-1805-01.indb 7 01-05-18 12:33

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Batavia BT-DS003 - 7062852 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info