Bedienungsanleitung Batavia BT-NXS001 - 7063578 (Seite 9 von 40) (Deutsch, Englisch, Holländisch, Französisch)

758154

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

English

8. Use

8.1 Mounting the saw chain

(See Fig. C, D, E).

Always wear gloves when handling the

saw chain.

a. Unscrew the head screw (3) coun-

ter-clockwise in order to remove the

sprocket cover (2).

b. Run the saw chain over the sprocket.

Please note the running direction of the

saw chain. The saw chain icon is shown

on the cover.

c. Use an oiler to oil the saw chain and the

sprocket.

d. Slightly tighten the saw chain with the

chain adjusting screw (7). For tighten-

ing, turn the screw clockwise.

e. Re-tighten the sprocket cover (2) with

the head screw (3) on the housing.

f. Firmly tighten the saw chain with the

chain adjusting screw (7). Use the

included adjustment key (11) to tighten

the screw.

8.2 Chain lubricating oil

• Only use commercially available, biode-

gradable chain oils that are specially

designed for use in multi saws.

• Do not use engine oil, waste oil or other

mineral oils.

8.3 Adjusting saw chain tension

(See Fig. C).

CAUTION: Do not tighten the saw chain too

much. Excessively high tension of saw

chain may cause breakage of saw chain,

wear of the guide bar and breakage of the

sprocket.

CAUTION: A chain which is too loose can

jump off the guide bar.

The saw chain may become loose after

many hours of use. From time to time check

the saw chain tension before use.

a. Remove the battery.

b. Loosen the head screw (3) a bit to

loosen the sprocket cover lightly.

c. Adjust the chain tension. Turn the chain

head screw (7) clockwise to tighten,

turn it counter-clockwise to loosen.

Tighten the saw chain so that the gap

between the centre of the lower side of

the guide bar and the saw chain

becomes approximately 3 – 4 mm.

d. Tighten the head screw (3) to secure

the sprocket cover.

8.4 Switching ON and OFF

The use of the Nexxsaw without lubricating

the chain with chain oil will damage the saw

chain and the guide bar.

a. Insert the battery into the battery

recess.

b. 

by the handgrip. To switch on the Nexx-

(1)

and release the switch.

c. Then press the ON/OFF switch within 1

second (10).

d. To switch off the saw, release the ON/

OFF switch.

8.5 Break-in time for new saw chains

a. Remove the battery and adjust the

chain tension.

b. Switch on the Nexxsaw and leave the

motor running idle for approx. 5

minutes.

c. Remove the battery and check the

chain tension again. If necessary,

re-tighten the chain.

d. Afterwards make only easy cuts for

approx. 30 minutes. Always ensure



Only use the Nexxsaw for heavier cuts

and greater cutting depths after the

running-in period has expired.

• Use only sharp saw chains. Blunt saw

chains can jam more easily. Check the

chain tension more frequently when

working with new saw chains, as the



• The service life of a saw chain depends



tension.

• During operation, the chain heats up and

re-tensioning may be necessary. Relax

the chain after work so that it is not too

tight the next time the cold machine is

used.

• Do not re-tighten saw chains that have

become too hot. After it has cooled

down, it may contract and lie too tight

7063578-Nexxsaw-Ma-WoF-1910-08.indb 9 15-10-19 17:12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Batavia BT-NXS001 - 7063578 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info