Bedienungsanleitung Batavia BT-PS002 - 7061494 (Seite 22 von 64) (Deutsch, Englisch, Holländisch, Französisch)

759585

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

b) Use safety equipment. Always wear

eye protection.

Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or

hearing protection used for appropriate

conditions will reduce personal injuries.

c) Avoid accidental starting. Ensure the

switch is in the off position before

plugging in.

Carrying power tools with your nger on

the switch or plugging in power tools that

have the switch on invites accidents.

d) Remove any adjusting key or wrench

before turning the power tool on.

A wrench or a key left attached to a

rotating part of the power tool may result

in personal injury.

e) Do not overreach. Keep proper footing

and balance at all times.

This enables better control of the power

tool in unexpected situations.

f) Dress properly. Do not wear loose

clothing or jewellery. Keep your hair,

clothing and gloves away from moving

parts.

Loose clothes, jewellery or long hair can

be caught in moving parts.

g) If devices are provided for the

connection of dust extraction and

collection facilities, ensure these are

connected and properly used.

The use of these pieces of equipment

reduce hazards caused by dust.

4. Power tool use and care

a) Do not force the power tool. Use the

correct power tool for your

application.

The correct power tool will do the job

better and safer at the rate for which it

was designed.

b) Do not use the power tool if the switch

does not turn it on and off.

Any power tool that cannot be controlled

with the switch is dangerous and must be

repaired.

c) Disconnect the plug from the power

source before making any

adjustments, changing accessories,

or storing power tools.

Such preventive safety measures reduce

the risk of starting the power tool

accidentally.

d) Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands

of untrained users.

e) Maintain power tools. Check for

misalignment or binding of moving

parts, breakage of parts and any other

condition that may affect the power

tools operation.

If damaged, have the power tool

repaired before use. Many accidents

are caused by poorly maintained power

tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to bind

and are easier to control.

g) Use the power tool, accessories and

tool bits etc., in accordance with these

instructions and in the manner

intended for the particular type of

power tool, taking into account the

working conditions and the work to be

performed.

Use of the power tool for operations

different from intended could result in a

hazardous situation.

5. Service

a) Please use a qualied expert who

uses original replacement parts to

repair your power tool.

This will ensure proper functioning of the

power tool.

7061494-T-Raxx_1200W-Ma-1805-17.indd 22 17-05-18 10:30

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Batavia BT-PS002 - 7061494 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info