Bedienungsanleitung Batavia BT-PS006 - 7062432 Thor (Seite 28 von 58) (Deutsch, Englisch, Holländisch, Französisch)

759577

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

English

Notes:

• Make sure that the vacuum cleaner is

suitable for use with the electric power

tool. Most dry vacuum cleaners for

domestic use are well suited to this

purpose.

• The vacuum cleaner is particularly useful if

many cuts are being performed succes-

sively. It means that less frequent stops

are required to clean the electric power

tool and the workplace.

• When you are cutting materials which may

produce dangerous dust, always use a

vacuum cleaner. This applies, in particular,

to hardwoods, MDF sheets and ceramics.

• Do not use dust extraction when cutting

metal.

CLEANING AND MAINTENANCE

Disconnect from mains power before carrying

out any maintenance work on the plunge saw!

All maintenance and repair work involving

opening the motor casing must be carried out

by an authorized service centre.

Always keep the plunge saw clean. Clean the

plunge saw after every use with a dry cloth or

compressed air. Do not use any aggressive

chemicals for cleaning.

• To reduce the risk of injury, always discon-

nect the main power plug before cleaning

the device.

• Clean your device with a damp cloth.

• For stubborn dirt, you can moisten the

cloth with a mild detergent or soft soap.

Other cleaning products often contain

chemicals that can damage the plastic

parts of the device.

• Make sure that air vents always remain

clean and open.

• Make sure that no liquids get into the

machine and never immerse the device in

liquid.

• Repairs, inspections of the machine inte-

rior, adjustments, and the replacement of

carbon brushes should only be performed

by a qualied electrician. Only identical

replacement parts should be used! For

more information, please contact cus-

tomer service.

• If an increased brush sparking occurs, it is

a sign that the carbon brushes must be

replaced. Have the carbon brushes

replaced by a professional.

TECHNICAL DATA

Mains power: . . . . . . .230 – 240 V~, 50 Hz

Power: . . . . . . . . . . . . . . . . 1000 W

No load speed: . . . . . . . . . . .5300 min-1

Saw blade dimensions:. . . . . .125 × 10 mm

Diamond blade dimensions: . . .125 × 10 mm

Weight: . . . . . . . . . . . . . . . . . 2.78 kg

Protecting class: . . . . . . . . . . . . . . . II

Max. cutting depth:. . . . . . . . . . .42 mm

Noise pressure level (LpA):. . . . . .100.1 dB(A)

Uncertainty: . . . . . . . . . . . .K = 3 dB(A)

Sound power level (LWA): . . . . . . 111.1 dB(A)

Uncertainty: . . . . . . . . . . . .K = 3 dB(A)

Hand-Arm-Vibration

Cutting wood (ah,W):

Main handle: . . . . . . . . . . . . 2.519 m/s2

Auxiliary handle: . . . . . . . . . . 2.300 m/s2

Cutting aluminium metal sheets (ah,M):

Main handle: . . . . . . . . . . . . 3.390 m/s2

Auxiliary handle: . . . . . . . . . . 4.043 m/s2

Cutting ceramics (ah):

Main handle: . . . . . . . . . . . . 2.464 m/s2

Auxiliary handle: . . . . . . . . . . 2.633 m/s2

Uncertainty: . . . . . . . . . . . K = 1.5 m/s2

Protecting rating: . . . . . . . . . . . . . IP20

7062432-THOR-1000W-Ma-#-1605-17.indb 26 26-05-16 11:31

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Batavia BT-PS006 - 7062432 Thor Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info