Bedienungsanleitung Batavia BT-RS004 - 7063411 (Seite 10 von 34) (Deutsch, Englisch, Holländisch, Französisch)

758286

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

English

11.1 Plunge cutting

• Plunge cutting may only be used on

soft materials such as wood, aerated

concrete, gypsum plaster boards, etc.

• However, this requires a certain practise

and is only possible with short saw

blades.

• Place the saw onto the workpiece and

switch it on.

• Ensure that the bottom edge of the

footplate rests on the workpiece

surface.

• Slowly saw into the workpiece at an

angle, moving the saw to a vertical

position and continue to saw along the

cutting line.

• Switch the saw off and lift off the work-

piece when the work is complete.

11.2 Flush sawing

• Elastic bi-metal saw blades allow you to

saw protruding objects (e,g, water pipes,

iron bars, etc,) nearby the wall.

• Apply the saw blade directly to the wall

and bend slightly so that the footplate

rests against the wall.

• Switch the machine on and saw off the

workpiece keeping constant lateral

pressure against the wall.

12. Maintenance and Cleaning

• Prior to all work on the reciprocating

saw, rst disconnect the main power

plug.

• Keep the saw blade and the saw in a

good and clean condition in order to

work well and safely. Clean the device

of dust and sawdust only with a paint-

brush, cloth or brush. Keep the ventila-

tion openings (7) always clean.

• Never use gasoline or other harsh

chemicals or abrasives to avoid damag-

ing the reciprocating saw. Make sure

that no liquids get into the reciprocating

saw.

12.1 Checking and replacing the carbon

brushes

The carbon brushes must be checked regu-

larly. If the carbon brushes are worn, the

machine will start to run unevenly.

Only use the correct type of carbon

brushes.

• Remove the carbon brush holders

(3) using a screwdriver.

• Clean the carbon brushes.

• In case of wear, replace both carbon

brushes at the same time.

• Mount the carbon brush holders (3)

using a screwdriver.

• After mounting the new carbon

brushes, let the machine run at no load

for 15 minutes.

13. Technical data

Nominal Voltage: . . . . . . . 230 V~ 50 Hz

Nominal Power: . . . . . . . . . . . . 1050 W

Stroke:. . . . . . . . . . . . . .0 – 2500 min-1

Stroke Rate:. . . . . . . . . . . . . . . 28 mm

Length of Power Cord: . . . . . . . . . . 3 m

Weight: . . . . . . . . . . . . . . . . . . 3.4 kg

Sound Pressure Level (LpA): . . . 92.2 dB(A)

Uncertainty: . . . . . . . . . . . . K = 3 dB(A)

Sound Power Level (LWA): . . . . 103.2 dB(A)

Uncertainty: . . . . . . . . . . . . K = 3 dB(A)

Hand Arm Vibration:. . . . . . . .25.65 m/s2

Uncertainty: . . . . . . . . . . . K = 1.5 m/s2

Degree of Protection: . . . . . . . . . . . IP20

Protection Class:. . . . . . . . . . . . . . . .II

13.1 Vibration level

The vibration emission level stated in this

instruction manual has been measured in

accordance with a standardised test given

in EN 60745; it may be used to compare one

tool with another and as a preliminary

assessment of exposure to vibration when

using the tool for the applications

mentioned

• using the tool for different applications,

or with different or poorly maintained

accessories, may signicantly increase

the exposure level

• the times when the tool is switched off

or when it is running but not actually

doing the job, may signicantly reduce

the exposure level

Protect yourself against the effects of vibra-

tion by maintaining the tool and its accesso-

ries, keeping your hands warm, and organiz-

ing your work patterns.

7062850-Reciprocating_Saw-Ma-1801-08.indb 8 19-03-18 11:09

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Batavia BT-RS004 - 7063411 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info