Bedienungsanleitung Batavia BT-WK002 7063005 (Seite 8 von 32) (Deutsch, Englisch, Holländisch, Französisch)

759823

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

English

• Hold the appliance by insulated gripping

surfaces only, because the metal heating

head may contact hidden wiring or its own

cord.

Immediately switch off the appliance

when:

• Plug and/or cable are defective or

damaged;

• The switch is defective;

• You smell or see smoke caused by

scorched insulation from the hot air gun.

Electrical safety

When using electric machines always observe

the safety regulations applicable in your coun-

try to reduce the risk of re, electric shock and

personal injury. Read the following safety

instructions and also the enclosed safety

instructions.

Always check that the power supply

corresponds to the voltage on the

rating plate.

Class II machine – Double insulation

– You don’t need any earthed plug

Replacing cables or plugs

If the power cord is damaged, it must be

replaced by the manufacturer or its service

agent or a similarly qualied person, in order to

avoid a hazard.

Immediately throw away old cables or plugs

when they have been replaced by new ones. It

is dangerous to insert the plug of a loose cable

in the wall outlet.

Using extension cables

Only use an approved extension cable suitable

for the power input of the machine. The mini-

mum conductor size is 1.5 mm2. When using a

cable reel always unwind the reel completely

Inadequate extension cords can be danger-

ous. If an extension cord is used, it shall be

suitable for outdoor use, and the connection

has to be kept dry and off the ground. It is

recommended that this is accomplished by

means of a cord reel which keeps the socket

at least 60 mm above the ground.

CONNECTING TO POWER SUPPLY

This product is designed with a cord retainer

that prevents the extension cord from being

pulled loose while using.

NOTICE: Always use cord retainer to properly

attach extension cord to the machine. Failure

to use cord retainer may result in damage to

the machine and/or extension cord.

• Form a loop with the end of the extension

cord.

• Insert loop portion of extension cord

through opening and place over cord

retainer.

• Slowly pull loop against cord retainer until

the slack is removed.

• Plug product into extension cord.

NOTE: Failure to remove all excess cord slack

from extension cord retainer could result in

plug loosening from receptacle.

CONTENTS

1 Weed Killer

1 Nozzle for surface weed control

1 Heating pin for underground weed control

1 Extension handle (2 parts)

1 Instruction manual

PRODUCT

Fig. A

1. On / off switch

2. Temperature switch

3. Ventilation openings

4. Hot Air nozzle

5. Extension handle

6. Handle

7. Lock button for extension handle

8. Stand

9. Nozzle for surface weed control

10. Heating pin for underground weed control

7063005-Maxxheat-Eco-Ma-1712-21.indb 8 04-01-18 11:01

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Batavia BT-WK002 7063005 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info