Bedienungsanleitung Batavia Racer BT-CS006 (Seite 26 von 60) (Deutsch, Englisch, Holländisch, Französisch)

589450

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

6.3 Note

Attention!

• Beforeundertakinganyworkontheelectric

power tool, unplug it from the mains!

• Donotusetoolinsertswhicharedefectiveor

whichexhibittearsorssures.

•

Donotuseaangeorangenutwithahole

larger or smaller than the hole in the tool insert.

• Onlyusetoolinsertsofthesametypeas

those delivered with the electric power tool.

Seek advice from a specialist trader.

6.4 Inserting and changing tool inserts

(gures 3 and 4)

• Pressthespindlelock(8).

• Loosentheclampingscrew(13)byturningit

clockwise with the Allen key (10).

• Pressthelockonthesafetyguard(7),push

back the movable safety guard and hold it

rmly.

• Ifthetoolinsert(11)isclamped,moveit

downwards.

• Cleantheangeandinstallanewtoolinsert.

Pay attention to the direction of motion (check

the arrows on the housing and on the tool

insert).

• Tightentheclampingscrews,anticlockwise,to

secure the tool insert, ensuring that the tool

insert is concentric.

• Beforeyouoperatetheon/offswitch,make

sure that the tool insert is correctly installed,

that the moving parts are free and the

clampingscrewsarermlytightened.

• Attention! The Allen key (10) must not be

left inserted in the clamping screw.

Note: After installing or changing a tool insert,

allowtheelectricpowertooltorunfortherst

minute without any load, in order to make sure

that the tool insert is correctly seated.

6.5 Setting the cutting depth (Figure 5)

• Loosentheadjustmentscrew(3).

• Adjustthecuttingdepthaccordingtothescale

(a) and tighten the adjustment screw (3).

• Forwoodandplastics,thecuttingdepth

should be selected to be a little deeper than

the material thickness.

Attention!

The stated vibration emission was determined using

a standardised measurement technique and allows

comparisons between this tool and others. The stated

vibration emission can also act as a preliminary risk

estimate. The actual vibration emission during tool

use may deviate from the indicated values,

depending on how the tool is used. Based on the

estimated risk under realistic conditions, suitable

preventative measures should be taken to protect the

user (The load run times for all the working cycles

should also be considered such as, for example,

continued turning and idling of the tool).

Limit noise and vibration to a minimum!

• Useonlyproblemfreeelectricpowertools.

• Regularlymaintainandcleantheelectric

power tool.

• Adaptyourworkingmethodstotheelectric

power tool.

• Donotoverloadtheelectricpowertool.

• Havetheelectricpowertoolinspected,if

necessary.

• Switchtheelectricpowertooloffwhenitisnot

in use.

6. USING FOR THE FIRST TIME

6.1 Unpacking

1. Open the packaging and carefully remove the

electric power tool.

2. Remove the packaging material.

3. Remove the packing and transport safety

devices (if any).

4. Check that all the expected contents are

present.

5. Inspect the electric power tool and accessories

for any damage during transport.

6. Retain the packaging, if possible, until the end

of the warranty period. Thereafter, please

dispose of the packaging in an environmentally

friendly way, by utilising a recycling system.

6.2 Connection to the power supply

Make absolutely sure, before connecting, that the

data on the nameplate agrees with the mains

power supply data. Always pull out the power plug

before making adjustments to the electric power

tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Batavia Racer BT-CS006 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info