Bedienungsanleitung Batavia XXL SPEED SAW Mini BT-CS001 (Seite 21 von 64) (Deutsch, Englisch, Holländisch, Französisch)

589451

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

f) Before sawing, rmly tighten the

adjustments of the cutting depth and

cutting angle. If the settings adjust

themselves during sawing, the saw blade may

become clamped and a kickback will occur.

g) Be especially careful, if you are making a

plunge cut in an existing wall or other non-

visible area. The immersed saw blade can

jam when sawing into hidden objects and

cause a kickback.

2.4 SAFETY INSTRUCTIONS FOR THIS MINI

CIRCULAR SAW

a) Check before each use that the safety

guard closes correctly. Do not use the saw

if the lower safety guard does not move

freely and does not close immediately.

Never clamp or secure the lower safety

guard in the open position.

If the saw should accidentally fall to the

ground, the lower safety guard may become

bent. Open the safety guard with the retraction

lever and ensure that it moves freely. Check

that it does not interfere with the saw blade or

other components, at any cutting angle or

cutting depth.

b) Check the condition and operation of the

spring for the lower safety guard. Do not

use the equipment if the lower safety guard

and spring do not work perfectly. Damaged

parts, adhesive deposits or accumulations of

shavings retard the operation of the lower

safety guard.

c) When making a plunge cut which is not at

right angles, make sure that the saw's

guide plate can not move laterally. Lateral

movements can cause the saw blade to jam

and hence result in kickback.

d) Do not put down the saw on the workbench

or oor, without the lower safety guard

covering the saw blade.

When slowing down after use, an unprotected

saw blade will move the saw in the direction

opposite to the cutting direction and will saw

whatever lies in its path. Pay attention,

therefore, to the deceleration time of the saw.

2.5 SAFETY INSTRUCTIONS FOR CUT OFF

GRINDING APPLICATIONS

Safety instructions for cut off grinders

The safety guard for the electric power tool

must be securely attached and adjusted so

that maximum safety is attained, i.e. the

smallest possible portion of the grinding

wheel shows openly to the operator. Make

sure that you and any other nearby

individuals are not in the plane of the rotating

grinding disc. The safety guard is intended to

protect the operator from fragments and from

accidental contact with the grinding wheel.

b) Use only diamond cutting discs for your

electric power tool. The fact that you can

attach an accessory to your electric power tool,

does not guarantee that it is safe to use.

c) The permissible rotary speed of the tool

insert must be at least as high as the

quoted maximum rotary speed of the

electric power tool. Accessories which are

rotated faster than their permissible speed may

break or y off.

d) Grinding wheels may only be used for their

recommended types of application, e.g.

never grind with the side face of a cutting

wheel. Cutting wheels only remove material

using the edge of the disc. Application of lateral

forces to these grinding wheels can cause

them to break.

e) Always use an undamaged clamping ange

of the correct size and shape for your

selected grinding disc. Suitable anges

support the grinding disc and so reduce the

danger of it breaking.

f) Do not use worn out grinding discs from

larger electric power tools. Grinding discs

from larger electric power tools are not suitable

for the higher rotary speeds of small electric

power tools and can break during use.

g) The outer diameter and thickness of tool

inserts must correspond with the given

characteristics of your electric power tool.

Wrongly-sized tool inserts cannot be

sufciently shielded or controlled.

h) Grinding discs and anges must t exactly

on the grinding spindle of your electric

power tool. Tool inserts, which do not t

exactly to the grinding spindle of the electric

power tool, will rotate unevenly and vibrate

strongly and may lead to loss of control.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Batavia XXL SPEED SAW Mini BT-CS001 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Batavia XXL SPEED SAW Mini BT-CS001

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info