589451
26
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
6.2 Remove blade guard
1. Insert 5 mm hex key (1) into the blade guard
fulcrum nut (2).
2. Turn hex key counter clockwise to remove the
blade guard fulcrum nut.
3. Slide blade guard fulcrum bolt (3) out of the
blade guard (4).
4. Carefully slide the blade guard off the tool.
6.3 Remove blade
Warning! Always unplug the tool from
the power source before making any
adjustments or changing the blade.
Warning! Always be extremely careful
when handling blades. They will be
extremely hot immediately after use.
They are also very sharp and may
cause serious injury.
1. Insert the 5 mm hex key (1) into the arbor
screw (2) on the LEFT side of the tool.
2. Press inward on the spindle lock button (3)
which is located on the RIGHT side of the tool.
3. Rotate the hex key CLOCKWISE while
pressing on the spindle lock button until the
spindle lock button engages the spindle.
4. Continue to rotate the arbor screw in a
26
TM
should also be considered such as, for example,
continued turning and idling of the tool).
Limit noise and vibration to a minimum!
Use only problem free electric power tools.
Regularly maintain and clean the electric
power tool.
Adapt your working methods to the electric
power tool.
Do not overload the electric power tool.
Have the electric power tool inspected, if
necessary.
Switch the electric power tool off when it is not
in use.
6. ASSEMBLY AND OPERATION
This multi-cutter precision saw is a versatile tool
that is designed for use in conned work spaces.
By selecting the appropriate cutting blades, it will
cut copper and aluminum tubing, ceramic and
marble tile, and assorted wood products. The
following assembly and operating instructions will
explain the tool and its operation in detail.
6.1 Install vacuum adaptor
The vacuum adaptor can be used to attach a
workshop vacuum hose to the tool. This will prevent
most cutting dust from escaping into the work area.
1. Line up the tabs on the small end of the
vacuum adaptor (1) with the matching slots (2)
in the vacuum port (3) in the rear of the tool.
2. Push the vacuum adaptor into the vacuum port
as far as it will go.
3. Twist the vacuum adaptor clockwise to lock it
into position.
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Batavia XXL SPEED SAW Mini BT-CS001 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Batavia XXL SPEED SAW Mini BT-CS001

Batavia XXL SPEED SAW Mini BT-CS001 Zusatzinformation - Deutsch, Englisch, Holländisch, Französisch - 1 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info