Bedienungsanleitung Bauknecht BBO 3O539 PLGT (Seite 6 von 8) (Englisch)

806624

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

DAILY USE

1. CHECK WATER CONNECTION

Check that the dishwasher is connected to the water supply and

that the tap is open.

2. SWITCH ON THE DISHWASHER

Press the ON/OFF button.

3. LOAD THE RACKS

(see LOADING THE RACKS).

4. FILLING THE DETERGENT DISPENSER

5. CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE

Select the most appropriate program in accordance with the type

of crockery and its soiling level (see PROGRAMS DESCRIPTION) by

pressing the P button.

Select the desired options (see OPTIONS AND FUNCTIONS).

6. START

Start the wash cycle by pressing the START/Pause button.

When the program starts you hear a beep.

7. END OF WASH CYCLE

The end of the wash cycle is indicated by beeps and the display

shows End. Open the door and switch o the appliance by pressing

the ON/OFF button.

Wait for a few minutes before removing the crockery - to avoid

burns. Unload the racks, beginning with the lower one.

The machine will switch o automatically during certain extended

periods of inactivity, in order to minimise electricity consumption.

If the crockery is only lightly soiled or if it has been rinsed with

water before being placed in the dishwasher, reduce the amount

of detergent used accordingly.

MODIFYING A RUNNING PROGRAM

If a wrong program was selected, it is possible to change it, provided

that it has only just begun: press and hold the ON/OFF button, the

machine will switch o. Switch the machine back on using the

ON/OFF button and select the new wash cycle and any desired op-

tions; start the cycle by pressing the START/PAUSE button.

ADDING EXTRA CROCKERY

Without switching o the machine, open the door (be ware of HOT

steam!) and place the crockery inside the dishwasher. Close the door

and press the START/Pause button the cycle will begin from the point

at which it was interrupted.

ACCIDENTAL INTERRUPTIONS

If the door is opened during the wash cycle, or if there is a power cut,

the cycle stops. Once the door has been closed or the electricity sup-

ply is restored, to start again the cycle from where it was interrupted,

press the START/Pause button.

To disable the DEMO MODE the following actions must be carried out

in sequence, without breaks. Switch the machine ON and then switch

it OFF again. Press the DELAY button until the buzzer is heard. Switch

the machine on again. The “dOF” indicator ashes and then turns OFF.

ADVICE AND TIPS

TIPS

Before loading the baskets, remove all food residues from the crockery

and empty the glasses. You do not need to rinse beforehand under

running water.

Arrange the crockery so that it is held in place rmly and does not tip

over; and arrange the containers with the openings facing downwards

and the concave/convex parts placed obliquely, thus allowing the

water to reach every surface and ow freely.

Warning: lids, handles, trays and frying pans do not prevent the spray-

er arms from rotating.

Place any small items in the cutlery basket.

Very soiled dishes and pans should be placed in the lower basket

because in this sector the water sprays are stronger and allow a higher

washing performance.

After loading the appliance, make sure that the sprayer arms can

rotate freely.

UNSUITABLE CROCKERY

• Wooden crockery and cutlery.

• Delicate decorated glasses, artistic handicraft and antique crockery.

Their decorations are not resistant.

• Parts in synthetic material which do not withstand high tempera-

tures.

• Copper and tin crockery.

• Crockery soiled with ash, wax, lubricating grease or ink.

The colours of glass decorations and aluminium/silver pieces can

change and fade during the washing process. Some types of glass (e.g.

crystal objects) can become opaque after a number of wash cycles too.

DAMAGE TO GLASS AND CROCKERY

• Only use glasses and porcelain guaranteed by the manufacturer as

dishwasher safe.

• Use a delicate detergent suitable for crockery

• Collect glasses and cutlery from the dishwasher as soon as the wash

cycle is over.

TIPS ON ENERGY SAVING

• When the household dishwasher is used according to the manufac-

turer’s instructions, washing tableware in a dishwasher usually

consumes less energy and water than hand dishwashing.

• In order to maximize dishwasher eciency it is recommended to initiate

the wash cycle once dishwasher is fully loaded. Loading the

household dishwasher up to the capacity indicated by the manufacturer

will contribute to energy and water savings. Information on correct

loading of tableware can be found in LOADING THE RACKS chapter.

• In case of partial loading it is recommended to use dedicated wash

options if available (Half load/ Zone Wash, Multizone), illing up only

selected racks. Incorrect loading or overloading the dishwasher may

increase resources usage (such as water, energy and time, as well as

increase noise level), reducing cleaning and drying performance.

• Manual pre-rinsing of tableware items leads to increased water and

energy consumption and is not recommended.

HYGIENE

To avoid odour and sediment which can be accumulated in the

dishwasher please run a high temperature program at least one a

month. Use a tea spoon of detergent and run it without the loading to

clean your appliance.

Bauknecht BBO 3O539 PLGT Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht BBO 3O539 PLGT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info