Bedienungsanleitung Bauknecht Berlin 1400 (Seite 2 von 2) (Englisch)

526795

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

5019 401 05045

Add the detergent as described in the chapter

“Detergent and Additives” in the booklet.

1. Turn the programme selector knob in

any direction to the desired programme.

The remaining time display shows the

duration of the chosen programme (in

hours and minutes) and the pilot lamp

above the “Start/Pause”button is

flashing.

2. The programme sequence indicator and

the indicator with the maximum possible

spin speed light up.

3. The temperature can be altered by pressing

the “+” or “-” button under the

corresponding LED display.

“Prewash” button

• Only for heavily soiled laundry (for example

sand or granular dirt). Programme duration is

increased by some 15 min.

“Intensive Rinse” button

• An additional rinse cycle is carried out.

• This additional option is particularly

suitable for areas with very soft water, for

washing baby linen and helping people

with detergent allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water

without being spun: discoloration of the

laundry and additional creasing are

prevented.

• This additional option is particularly

recommended for the programme

“Synthetics” or “Delicates”.

• This additional function is particularly

useful if you want to postpone spinning to

a later time.

Note: The programme has reached the

“Rinse Hold” when the “Rinse Hold” button

light flashes.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the

programme will terminate automatically

with the appropriate spin cycle for the

current programme.

• If you do not wish to spin the clothes, turn

the programme selector knob to “Drain/

Cancel” and press the “Start/Pause”

button again.

“Speed Reduction“ button

• A maximum spin speed is assigned to each

programme.

• Press the button to set another speed for the

spin cycle.

• If the spin speed “0” is selected, the final

spin is cancelled. The water is only

drained out.

CONSUMPTION DATA

Programme Temperature

(°C)

Wash

(kg)

Water

(l)

Energy

(kWh)

Programme

duration **

approx.

(hours : minutes)

Coloured Cotton

95 5.0 44*** 1.60 1:55

Coloured Cotton

60 5.0 39 0.95 2:00

Coloured Cotton

40 5.0 39 0.55 2:00

Daily Mixed

40 3.0 46 0.58 1:00

Synthetic

60 2.5 55*** 0.70 1:30

Synthetic

40 2.5 50 0.50 1:15

Rapid wash

30 3.0 35 0.40 0:30

Delicate

30 1.5 50 0.50 0:45

Wool

40 1.0 50 0.50 0:40

Handwash

30 1.0 35 0.40 0:35

* Consumption

values

were measured in normalized conditions in compliance with Standard IEC 60456.

** The

programme duration

may also vary from the chart values. The washing machine is able to allow for

particular household conditions and to adapt the programme run time accordingly.

***To reduce

the water temperature

, some cold water is

added at the end of the main wash cycle, before

the pump drains the water out.

POUR IN DETERGENT, CLOSE THE

DOOR AND SELECT A PROGRAMME

SELECT SPECIAL OPTIONS -

The indicator lights go on.

“Easy Ironing” button

• To lessen creasing, the water quantity is

increased and the clothes are spun very

gently at reduced power. This makes your

laundry significantly damper at the end of

the programme.

The “Start Delay” allows to run the machine

at the consumer's convenience, for example

at night when electricity is cheaper.

• Press the “Start Delay” button. Select the

programme start from 1 to 19 hours

ahead by pressing the button again.

• Press the “Start/Pause”button. The Start

Delay indicator light flashes until the

programme starts.

• During programme start the remaining

time appears in the digital display.

“Start Delay” correction.

• Before the “Start Delay” has been started:

The preset number of hours can be

altered by continuously pressing the

“Start Delay” button.

The number of hours can be reduced by

first turning the programme selector

switch to the “Off” position. Then set the

programme again and select the desired

number of hours.

• After the “Start Delay” has been started:

The preset number of hours can be reduced

by pressing the “Start Delay” button again.

To increase the number of hours

preselected, first turn the programme

selector switch to the “Off” position. Then

set the programme and the additional

options again and select the desired

number of hours.

After you have selected the programme and

the additional option, the indicator light over

the “Start/Pause” button flashes. Turn on

the tap and start the programme by pressing

the “Start/Pause” button. Now the indicator

light above the button goes on.

In addition, all programme phases are

indicated by the associated lights. After the

end of a programme phase the associated

indicator light goes out. Thus the

programme sequence indicator moves from

left to right across the wash, rinse and spin

phases. At the end of the programme only

the “End” indicator is still on.

In the first 15 minutes after the start of the

“Cotton”, “Cotton coloured” and “Synthetic”

programmes the door can be opened to add

further laundry. This is not possible if “Rapid

Wash” is selecte.

• The remaining time display shows “0:00”

and the “End” indicator lights up.

1. Turn the programme selector knob to the

“Off” position.

2. Turn off the tap.

3. Open the door and unload the machine.

A newly-selected programme will continue

in the same programme section during

which the current programme was

interrupted. Therefore do not add any more

detergent.

1. Press the “Start/Pause”button to

interrupt the programme. The indicator

light flashes.

2. Select the new programme (with

temperature), any additional options and

- if you wish - another spin speed.

3. Press the “Start/Pause”button again to

restart the programme.

• If you are in the “Prewash” programme step

this additional option can not be deselected

as described (to do this see “Interrupt/Cancel

Programme).

1. Press the “Start/Pause”button to

interrupt the programme. The indicator

light flashes.

2. Set the programme selector to “Drain/

Cancel”. The spin speed “0” and the

remaining time “2 minutes” are displayed.

3. Press the “Start/Pause”button to start the

“Drain/Cancel” programme.

START DELAY

PROGRAMME START

DOOR LOCK

PROGRAMME END

RESELECT AFTER PROGRAMME START

CANCEL/DELETE PROGRAMME

4gb05045.fm Page 2 Wednesday, February 26, 2003 5:58 PM

Black process 45.0° 100.0 LPI

Bauknecht Berlin 1400 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht Berlin 1400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info