Bedienungsanleitung Bauknecht BFO 3C33 P 6.5 X (Seite 5 von 8) (Englisch)

806597

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

LOADING THE RACKS

LOWER RACK

For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should

ideally be placed at the sides to avoid interferences with the spray arm.

The lower rack has tip-up supports which can be used in a vertical po-

sition when arranging plates or in a horizontal position (lower) to load

pans and salad bowls easily.

(loading example for the lower rack)

POWER CLEAN®

Power Clean® uses the special water jets

in the rear of cavity to wash more

intensively the high dirty items. The lower

rack has a Space Zone, a special pull-out

support in the rear of the rack that can be

used to support frying pans or baking pans in upright position, thus taking

up less space. Placing the pots/casseroles faced to the Power Clean®

component please activate the POWER CLEAN® on the panel.

How to use Power Clean®:

1. Adjust the Power Clean® area

G folding down the rear plate

holders to load pots.

2. Load pots and casseroles inclined

vertically in Power Clean® area.

Pots have to be inclined towards

the power water jets.

CUTLERY BASKET

The basket is equipped with top grilles for

improved cutlery arrangement. The cutlery

basket should be positioned only at the front

of the lower rack.

Knives and other utensils with sharp edges

must be placed in the cutlery basket with

the points facing downwards or they must

be positioned horizontally in the tip-up

compartments on the upper rack.

UPPER RACK

Load delicate and light dishes:

glasses, cups, saucers, low

salad bowls.

(loading example for the upper rack)

FOLDABLE FLAPS WITH ADJUSTABLE POSITION

The side foldable aps can be fold or

unfold to optimize the arrangement of

crockery inside the rack. Wine glasses

can be placed safely in the foldable

aps by inserting the stem of each

glass into the corresponding slots.

Depending on the model:

• to unfold the aps there is needed

to slide it up and rotate or release it

from the snaps and pull it down.

• to fold the aps there is needed to

rotate it and slide aps down or pull

it up and attach aps to the snaps

ADJUSTING THE HEIGHT OF THE UPPER RACK

The height of the upper rack can be adjusted: high position to place bulky

crockery in the lower basket and low position to make the most of the

tip-up supports by creating more space upwards and avoid collision with

the items loaded into lower rack.

The upper rack is equipped with a Upper Rack

height adjuster (see gure), without pressing

the levers, lift it up by simply holding the rack

sides, as soon as the rack is stable in its upper

position. To restore to the lower position, press

the levers A at the sides of the rack and move

the basket downwards.

We strongly recommend that you do not

adjust the height of the rack when it is

loaded.

NEVER raise or lower the basket on one side only.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht BFO 3C33 P 6.5 X Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht BFO 3C33 P 6.5 X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info