Bedienungsanleitung Bauknecht BIK11 FPH8TS2 PT (Seite 8 von 22) (Englisch)

723437

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Once selected the “Drain”

function or when requested

from display, start the

function and follow the

actions indicated: Open the

door and place a large jug (at

least 2 liters capable) under

the drain nozzle located at

the bottom of the panel, to

the left of the inlet nozzle. If

needed, it is possible operate the control panel to pause

the drain process and to resume it (for example in case

the jug would be already full of water in the middle of

the draining process).

It is not possible to drain the reservoir before 4 hours

have elapsed from the last cycle (or the last time the

product was powered). During this wait time, the display

will show the following feedback <Water is TOO HOT.

Wait until the temperature decreases>.

DESCALE

This special function, activated at regular intervals,

allows you to keep the boiler and the steam circuit in

the best condition.

A message will be shown on display, to remind you to

execute this operation regularly.

At the beginning you have the option to skip these

invitations, but at a certain point it will become

mandatory to carry out descaling, otherwise it will be

impossible to use the steam functions.

The function is divided into several phases: draining,

descaling, rinsing. The average duration of the full

function is around 185 minutes (descaling ~120 min.,

rinsing ~65 min.) Once the function is started, follow all

the steps indicated on the display.

Please note: The function can be paused but, if it is canceled

at any time, the entire descaling cycle must be repeated from

the beginning.

» DESCALING SOLUTION

For best results, we recommend to prepare the

descaling solution adding 3 sachets (corresponding to

75g) of the specific Oven WPRO descaler in 1,7 liters of

drinking water. For an optimal descaling performance, it

is recommended to prepare the descaling solution using

ambient temperature water.

WPRO descaler is the suggested professional product for

the maintenance of the best performance of your steam

function in the oven. Please follow the instructions for

use on the packaging. For orders and information

contact the after sales service or www.bauknecht.eu

Bauknecht will not be held responsible for any damage

caused by the use of other cleaning products available

on the market.

Cooking functions cannot be activated during the

cleaning cycle.

PROBE

Using the probe enables you to measure the core

temperature of the meat during cooking to ensure

that it reaches the optimum temperature. The

temperature of the oven varies according to the

function that you have selected, but cooking is

always programmed to finish once the specified

temperature has been reached. Place food in the

oven and connect the food probe to the socket.

Keep the probe as far away from the heat source as

possible. Close the oven door. Tap

. You can choose

between the manual (by cooking method) and My

Menu (by food type) functions if use of the probe is

allowed or required.

Once a cooking function has been started, it will be cancelled

if the probe is removed Always unplug and remove the probe

from the oven when taking out the food.

USING THE FOOD PROBE

Place the food in the oven and connect the plug

by inserting it into the connection provided on the

righthand side of the oven’s cooking compartment.

The cable is semi-rigid and can be shaped as needed

to insert the probe into the food in the most effective

way. Make sure that the cable does not touch the top

heating element during cooking.

MEAT: Insert the probe deep into the meat, avoiding

bones or fatty areas. For poultry, insert the probe

lengthways into the centre of the breast, avoiding

hollow areas.

FISH (whole): Position the tip in the thickest part,

avoiding the thorns.

OVEN BAKING: Insert the tip deep into the dough

by shaping the cable to achieve the optimum probe

angle. If you use the probe when cooking with

the My Menu functions, cooking will be stopped

automatically when the selected recipe reaches the

ideal core temperature, without the need to set the

oven temperature.

1 + +2

= 75 g

1,7 Liters

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht BIK11 FPH8TS2 PT Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht BIK11 FPH8TS2 PT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info