Bedienungsanleitung Bauknecht BS 3960F AL (Seite 7 von 11) (Englisch)

806828

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

DAILY USE

SWITCHING THE HOB ON/OFF

To turn the hob on, press the power button for around 1 second. To turn the

hob o, press the same button again, and all cooking zones will be deactivated.

POSITIONING

Do not cover the control panel symbols with the cooking pot.

Please note: In the cooking zones close to the control panel, it is advisable to

keep pots and pans inside the markings (taking both the bottom of the pan

and the upper edge into consideration, as this tends to be larger).

This prevents excessive overheating of the keypad. When grilling or frying,

please use the rear cooking zones wherever possible.

ACTIVATING/DEACTIVATING COOKING ZONES AND ADJUSTING POWER

LEVELS

To activate the cooking zones:

Move your nger horizontally across the scroll keypad (SLIDER) of the required

cooking zone to activate it and adjust the power.

The level will be shown in

line with the area and the indicator light identifying the active cooking zone.

The ”P” button can be used to select the fast heating function (Booster).

To deactivate the cooking zones:

Select the “OFF“ button at the beginning of the scroll keypad.

3 sec

CONTROL PANEL LOCK

To lock the settings and prevent it from accidentally switching on, press

and hold the

OK/Key lock button for 3 seconds. A beep and a warning

light above the symbol indicate that this function has been activated. The

control panel is locked except for the switching o function ( ). To unlock

the controls, repeat the activation procedure.

TIMER

The timer controls all cooking zones.

To activate the timer:

Press the “+“ or “−“ button to set the desired time on the cooking zone in

use. An indicator light will be activated in line with the specic symbol .

Once the set time has elapsed, a beep will sound, and the cooking zone will

switch o automatically.

The time can be changed at any point, and several timers can be activated

simultaneously.

In case 2 timers on the same side of the hob are activated simultaneously,

“Zone selection indicator“ ashes and the relative cooking time selected is

displayed on the central display.

To deactivate the timer:

Press the

“+“

and

“−“

buttons together until the timer is deactivated.

TIMER INDICATOR

This LED (when ON) indicates that the timer has been set for the cooking zone.

FUNCTIONS

FLEXI SPACE

By selecting the “FLEXI SPACE“ button, you can combine two cooking

zones and use them at the same power by covering the entire surface with

a large pot or partially with a round/oval pot.

The function always remains on and, when using only one pot, can be

moved over the entire area. In this case, both left-hand scroll keypads can

be used indierently.

Ideal for cooking with oval or rectangular pots or with pan supports.

To deactivate the function, press the “FLEXI SPACE“ button.

N.B. Special functions cannot be selected when using this feature.

IMPORTANT: Place the pots in the center of the cooking zone so that they

cover at least one of the reference points (as shown below).

Minimum requirements

Smart device: Android with a 1280x720 (or higher) screen or iOS. See on App

store the App compatibility with Android or iOS versions. Wireless router:

2.4Ghz Wi-Fi b/g/n.

How to setup

To use this feature you need to own: a smart phone or a tablet and a

wireless router connected to internet.

Please verify with your smart device that the signal strength of your home

wireless network close to the appliance is good.

Download the HomeNet App for your mobile device. You can download

the HomeNet App by visiting either iTunes or Google Play.

Once downloaded, please follow the instructions from App to create an account.

Once you have your account, open the App and press “+“ on the bottom

left of the screen to add a new appliance to your account. The HomeNet

App will be your guide to walk you through all of the steps needed to

complete the process.

The sticker with QR, SAID and Mac Address code is used to sync a smart

device with your appliance.

The pairing procedure has to be carried out again only if you change your

router set up properties (network name or password or data provider).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht BS 3960F AL Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht BS 3960F AL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info