Bedienungsanleitung Bauknecht BS 5760C CPFT (Seite 19 von 40) (Deutsch, Englisch, Französisch, Italienisch)

806806

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

MAINTENANCE AND CLEANING

WARNING

•Do not use steam cleaning equipment.

•Before cleaning, make sure the cooking zones are switched o and that the residual heat indicator (“H“) is not displayed.

Important:

•Do not use abrasive sponges or scouring pads as they may damage

the glass.

•After each use, clean the hob (when it is cool) to remove any deposits

and stains from food residue.

•A surface that is not kept suitably clean may reduce the sensitivity of

control panel buttons.

•Use a scraper only if residues are stuck to the hob. Follow the scraper

manufacturer's instructions to avoid scratching the glass.

•Sugar or foods with high sugar content can damage the hob and must

be immediately removed.

•Salt, sugar and sand could scratch the glass surface.

•Use a soft cloth, absorbent kitchen paper or a special hob cleaner (follow

the Manufacturer’s instructions).

•Spills of liquid in the cooking zones can cause the pots to move or vibrate.

•After cleaning the hob, dry thoroughly.

If the CleanProtect logo is present on the glass, the hob has been treated

with CleanProtect technology. This exclusive coating ensures excellent

cleaning results and keeps the hob surface shiny for longer.

Daily cleaning after each use is suggested.

To clean CleanProtect hobs, follow these recommendations:

•Soak the zones that need to be cleaned with water making sure to

cover the entire stained area and being careful not to drop water on

the control panel.

•For the water soaking:

• In normal conditions, wait at least 2 minutes.

• In heavy-dirt conditions, wait for at least 5 minutes.

•If the water dries on the hob it is necessary to repeat the soaking step.

•Use a non-abrasive sponge to remove deposits and dry the hob after

cleaning.

TROUBLESHOOTING

•Check that the electricity supply has not been shut o.

•If you cannot turn the hob o after using it, disconnect it from the power

supply.

•If alphanumeric codes appear on the display when the hob is switched on,

consult the following table for instructions.

Please note: The presence of water, liquid spilled from pots or any objects

resting on any of the hob buttons can accidentally activate or deactivate

the control panel lock function.

DISPLAY CODE DESCRIPTION POSSIBLE CAUSES SOLUTION

F0E1

Cookware is detected but it is not

compatible with requested operation. The cookware is not well positioned on

the cooking zone, or it is not compatible

with one or more cooking zones.

Press On/O button twice to remove the

F0E1 code and restore the functionality

of the cooking zone. Then, try to use the

cookware with a dierent cooking zone, or

use dierent cookware.

F0E7 Wrong power cord connection. The power supply connection is not

exactly as indicated in “ELECTRICAL

CONNECTION“

paragraph

Adjust the power supply connection

according to “ELECTRICAL CONNECTION“

paragraph

F0EA

The control panel switches o because

of excessively high temperatures. The internal temperature of electronic

parts is too high. Wait for the hob to cool down before using

it again.

F0E9 The cooking zone turns o when the

temperatures are too high. The internal temperature of electronic

parts is too high. Wait until the cooking area has cooled o

before using it again.

F0E2, F0E4, F0E6,

F0E8, F0EC, F1E1,

F2E1, F6E1, F6E3,

F7E5, F7E6

Disconnect the hob from the power supply.

Wait a few seconds then reconnect the hob to the power supply.

If the problem persists, call the service centre and specify the error code that appears on the display.

d E

[when the hob is off]

The hob does not switch heat up.

The functions do not come on. DEMO MODE on.

Follow the instructions in the “DEMO

MODE“ paragraph.

e.g.

The hob does not allow a special

function to be activated. The power regulator limits the power

levels in accordance with the maximum

value set for the hob.

See paragraph “Power management“.

e.g.

[

Power level lower than

level requested

]

The hob automatically sets a minimum

power level to ensure that the cooking

zone can be used.

The power regulator limits the power

levels in accordance with the maximum

value set for the hob.

See paragraph “Power management“.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht BS 5760C CPFT Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht BS 5760C CPFT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info