Bedienungsanleitung Bauknecht CHI 6640F IN-01 (Seite 6 von 9) (Englisch)

806831

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

At the rst switch on, all the oven knobs 4, 5, 6 and 7 must be in the “0”

position.

FIRST TIME USE

DAILY USE

SWITCHING THE HOB ON/OFF

Cook top is switched on rotating one of the knobs on the oven (4,5,6 or 7).

To switch o rotate the knobs on the oven (4,5,6 or7) in “0” position.

If the hob has been in use, the residual heat indicator “H” remains lit until

cooking zone have cooled down.

SWITCHING ON AND ADJUSTING COOKING ZONES

When a knob (4,5,6 or 7) is rotated the correlated zone is switched on with

the power level corresponding to the knob position.

The display will show the level as per knob position and the value showed

will be updated according knob rotation.

Cooking zone positioning

Cooktop operation

lamp

Level selector

Power indicator display

Cooking zone positioning

Booster button

FLEXI

Power levels FLEXI function

Place the pot on the cooking zone, switching the hob on, activate the required

zone by rotation of knobs on the oven 4, 5, 6 or 7.

It is possible to select the required power level, from min. 0 to max. 9 by rotation

of knobs on the oven 4, 5, 6 or 7.

DEACTIVATION OF COOKING ZONES

To switch o the cooking zone, rotate the corresponding knob on the oven

on “0” position.

The cooking zone switches o and, if still hot, the letter “H” appears on

zone display.

CONTROL PANEL LOCK (only with all knobs on the oven in “0” position)

This function locks controls to prevent accidental activation of the hob. To

activate the control panel lock, switch the knob on the oven in “0” position,

press the lock function button (key 6) for three seconds; an acoustic signal

and a luminous indicator near the padlock symbol signal activation.

To deactivate the control lock, repeat the activation procedure. The

luminous dot goes o and the hob is active again.

The presence of water, liquid spilled from pots or any objects resting on

the button below the symbol can accidentally activate or deactivate the

control panel lock.

MINUTE MINDER KEY 5

The function does not shut o the zone.

The minute minder can be used to set the time for a maximum of 99

minutes (1 hour and 39 minutes).

Press the minute minder and a beep signals the function. The display

shows “00”. The minute minder value can be decreased and increased by

keeping “+” and “-” buttons pressed. When the set time has elapsed, an

acoustic signal sounds.

To deactivate the minute minder, keep the Timer button pressed for at

least 3 seconds.

RESIDUAL HEAT INDICATOR

The hob is tted with a residual heat indicator for each cooking zone. These

indicators alert the user when cooking zones are still hot.

If the display shows “H“, the cooking zone is still hot. If the residual heat

indicator of a given cooking zone is lit, that zone can be used, for example,

to keep a dish warm or to melt butter.

When the cooking zone cools down, the display goes o.

INCORRECT OR MISSING POT INDICATOR

If you are using a pot that is not suitable, not correctly positioned or not of the

correct dimensions for your induction hob, the message “no pot” will appear

in the display (see gure above). If no pot is detected within 60 seconds, the

hob switches o.

FAST BOIL FUNCTION BOOSTER

This function, only present on some cooking zones, makes it possible to

exploit the hob’s maximum power (for example to bring water to the boil

very quickly).

To activate the function, press the required booster button “P” appears on

the display. After 10 minutes’ use of the booster function, the appliance

automatically sets the zone to level selected on oven knob.

ACCESSORIES

POTS AND PANS

Only use pots and pans made from ferromagnetic

material which are suitable for use with induction

hobs. To determine whether a pot is suitable, check

for the symbol (usually stamped on the bottom).

A magnet may be used to check whether pots are

magnetic. The quality and the structure of the pot base can alter cooking

performance.

RECOMMENDED POT BOTTOM WIDTHS

Place the pot on the required cooking zone before switching the hob on.

For good cooking results, the diameter of the base of the pot should match

the size of the hotplate.

IMPORTANT: The cooking zones will not switch on if pots are not the right

size.

To determine the size of the pot please measure the base of the pot and refer

to recommended pots bottom width table, for perfect usage and correct pan

NOOK

detection. Each cooking zone has a minimum limit of detecting pans, which

varies depending on the material of the pan being used. You should therefore

use the cooking zone that is most suitable for the diameter of your pan.

28 cm.

21 cm.

17 cm. min. 28 cm. max.

15 cm. min. 21 cm. max.

18 cm.

14,5 cm.

12 cm. min. 18 cm. max.

10 cm. min. 14,5 cm. max.

FLEXI COOK 23 cm

39 cm

12 cm

Min.Max.

IMPORTANT: To avoid a permanent damage the hob:

•do not use pots with bottoms that are not at;

•do not use metal pots with enamelled bottom;

•do not place hot pots/pans over the control panel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht CHI 6640F IN-01 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht CHI 6640F IN-01

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info