Bedienungsanleitung Bauknecht EMCK 7263 (Seite 27 von 36) (Deutsch, Englisch)

662983

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

GB25

USING THE ELECTRONIC PROGRAMMER

Description of Functions

Using the oven for the first time

Setting the time of day and the tone of the acoustic signal.

Upon connection of the oven to the mains power supply, AUTO and 0.00 flash on the display. To set the

time of day, press buttons - and + at the same time: the two central dots flash. Set the time of day using the

buttons + and -. Having selected the desired value, press the middle button. The display shows “ton 1”. To

select the desired tone, press button -. Having selected the preferred tone, press the middle button. To

change the time of day, proceed as described above.

Setting cooking time

After selecting the cooking mode and temperature using the knobs, press the middle button: the display

shows 0.00 and the bell symbol flashes. Press the middle button again: on the display and 0.00 appear

in sequence and AUTO flashes. Set cooking time using the buttons + and - (the maximum programmable

value is 10 hours). After a few seconds the display shows the time of day and AUTO remains lit, confirming

the setting. To view the remaining cooking time and change it if necessary, press the middle button for 2

seconds and then press it again a second time. At the end of the set time, the symbol switches off, the

alarm sounds and AUTO flashes on the display. Press any button to deactivate the alarm. Return the

functions and temperature knob to zero and press the middle button for two seconds to end cooking.

Delaying cooking end time

After selecting cooking time, press the middle button: the display shows , cooking end time and AUTO

flashing in sequence. Press the button + to view the desired cooking end time (cooking can be delayed by

a maximum of 23 hours and 59 minutes). After a few seconds the display shows the time of day, the

symbol switches off and AUTO remains lit, confirming the setting. To view cooking end time and

change it if necessary, press the middle button and then press it again twice. At the end of the countdown,

the symbol lights up and the oven proceeds with the selected cooking mode.

Setting the timer

To set the timer, long-press the middle button: the display shows 0.00 and the bell symbol flashes. Set the

timer using the button + (the maximum programmable value is 23 hours and 59 minutes). The countdown

begins after a few seconds. The display shows the time of day and the bell remains lit, confirming the timer

has been set. To view the countdown and change it if necessary, press the middle button again.

1. Button - : to decrease the value shown on the display

2. Button : for selecting the various settings:

a. Timer

b. Cooking time

c. Cooking end time setting

3. Button + : to increase the value shown on the display

A. The symbol indicates that the timer function is in operation

B. The AUTO symbol confirms the setting has been made

2 31

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht EMCK 7263 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info