Not all soil levels are selectable for each programme.
“Prewash” button
•Adds an additional prewash cycle to the wash programme
selected; prolongs the programme by about a quarter of an hour.
•Recommended for heavily soiled laundry (e.g. with sand or
granular dirt).
•Do not use liquid detergent for the main wash when activating
the “Prewash” option.
“Intensive rinse” button
•More water is added and rinse cycle is prolonged.
•This option is particularly suitable for areas with very soft water or
for washing baby linen, and helps people with allergies.
“Rinse hold” button
•Press the button if you want to postpone spinning to a later
time or if you want to drain only.
•The laundry will remain in the last rinse water without
progressing to the final spin cycle to avoid creasing and prevent
colours from changing.
•The washing machine stops to rinse hold as soon as the “Rinse
hold” symbol on the display lights up; the “Start
(Pause)” button blinks.
•Do not leave the laundry to soak in the “Rinse hold” for too long.
To terminate the “Rinse hold”:
•If you want to drain only without spinning: press the “Start
(Pause)” button to start the drain process.
•If you want to spin your laundry: press the “Spin” button
to select the desired spin speed and then “Start (Pause)” to
start the spin cycle.
“Tumble fresh”
•Select this option if you cannot unload the laundry soon after
programme end, or if you tend to forget the laundry in your
washing machine. It will help to keep your laundry fresh.
•The washing machine will start to tumble the laundry
periodically about one hour after programme end.
•The light of the “Tumble fresh” button will blink while this
function is active, and the display will show “0:01” with
blinking colon.
•The periodic tumbling will last up to approximately 12 hours
after the end of your wash programme, and you can stop it at
any time by pressing the “Tumble fresh” button. It will last a
while until you can open the door.
•After the “tumble fresh” period has run out, the display
indicates “End”.
CONSUMPTION DATA
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
without “Rapid”with “Rapid”
Mixed406.0670.581:00—
Cotton958.082**2.402:20—
Cotton*608.0590.984:002:20
Cotton*604.0420.783:10
Cotton408.0780.853:152:05
Cotton*404.0420.633:00
Synthetics603.548**0.951:551:14
Synthetics403.5450.531:400:59
Delicates302.5600.400:45—
Wool/Handwash402.0490.630:40—
White408.0770.802:20—
Light colours405.5700.501:20—
Dark405.0450.501:401:15
Super Silent608.0750.954:00—
AquaEco403.0190.451:00—
Speed 15303.0300.200:15—
Jeans406.0650.551:301:15
Big Items403.0740.751:30—
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the
values in the table in relation to the water supply pressure and temperature, the load and the type of wash. Water and energy consumption refer to the default setting of
the programmes, with temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also
“Troubleshooting Guide” in your Instructions for Use).
*Reference programmes for Energy Label.
**To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained.
***Automatic adaptation of programme duration after detection of wash load.
***
***
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION
“Rapid” button
•Enables quicker washing by shortening the programme duration.
•Recommendable for only lightly soiled laundry.
“Spin” button
•Every programme has a predefined spin speed. Press the
button if you want to set a different spin speed.
•If spin speed “0” is selected, the final spinning is cancelled and
the water is drained out only. However, intermediate spin
peaks remain during rinse.
The “Start delay” allows to run the machine at the consumer’s
convenience, for example at night when electricity is cheaper.
•Select programme, temperature, spin speed and options.
•Press the Start delay button to select a delay time up to 23 hours.
•Press the “Start (Pause)” button .
The countdown of the delay time begins. The clock symbol next
to the delay time and the colon between hours and minutes blink.
•The time delay indication disappears when the programme
starts and it is replaced by the remaining programme time.
•If you use the “Dosing Aid” button: select the delay time
BEFORE pressing the “Dosing Aid” button. The countdown
of the selected delay time begins after having pressed the
“Start (Pause)” button for the second time (see
separate Instructions for Use concerning the “Dosing Aid”).
To cancel the “Start delay”
...before you press the “Start (Pause)” button:
•Press the “Reset/Drain” button , or set the start delay
time to “0:00” - the delay time disappears after a few seconds.
...after having started the programme:
-Press the “Start (Pause)” button - the delay time
disappears from the display. Press “Start (Pause)” again to
start the selected programme immediately.
With the “Dosing Aid” button, you can make your washing machine
indicate you the recommended detergent quantity for your wash
load, depending on the soil level selected and the size of the load.
•Helps to save detergent and protect the environment and also
sensitive skin by avoiding detergent overdosing.
•Before you use this function, you must adapt the washing
machine to the dosing amounts which are recommended for
the detergents you use. Also check if your region’s water
hardness corresponds with the water hardness level “soft” of
your washing machine - if not adapt it.
•Select programme, options and start delay BEFORE using the
“Dosing Aid” button.
For any details, refer to the separate “Dosing Aid” Instructions for Use.
Before starting and after end of a programme, the symbol lights to
show that the door can be opened. As long as a wash programme
is running, the door remains locked and must on no account be
forced open. In case you have to open it urgently during a running
programme, refer to “Reset a running programme before the end”.
Open the tap and press the “Start (Pause)” button; the
blinking “Start (Pause)” button light becomes constant. The
programme sequence indication shows the current programme
phase, running from left to right through wash, rinse, spin, drain. In
some phases, the remaining programme time is newly calculated -
If this is the case, the on the display will fade, and the
remaining time is replaced by an animation.
Activating the child lock prevents children from starting a wash
cycle or changing the settings of a running programme. The child
lock cannot be activated or deactivated when the programme
selector is in the “Off/O” position. To activate the child lock:
•Turn the programme selector to a programme position, or run
a programme as usual.
•Press the 2 buttons marked with the key symbol simultaneously for
a few seconds. The “Child lock” symbol will shortly blink and
then light up to indicate that the child lock is active.
The programme setting cannot be changed anymore. The only
change possible is to switch the washer off by turning the
programme selector to the “Off/O” position. To deactivate the
child lock, proceed in the same way as for activating it.
If one of the failure indications on the display lights up, refer to the
“Troubleshooting Guide” in your “Instructions for Use”.
•The display shows “End”, and the “Door open” indication
lights up.
1.Turn the programme selector to the “Off/O” position.
2.Close the water tap.
3.Open the door and unload the machine.
•Leave the door ajar to allow the drum to dry.
•If you do not turn the programme selector to the “Off/O”
position, all lights of the control panel go out after a few
minutes to save energy - only “End” will remain on the display.
The symbol will light up at the end of the programme if you used
too much detergent. Use less detergent next time. If the symbol
lights up and the display shows “Fod”, too much foam interrupted
the wash process. Refer to the “Troubleshooting Guide” in your
Instructions for Use.
1.Press the “Start (Pause)” button to pause the
programme. The light blinks.
2.Select the new programme, temperature, any options and
another spin speed if you want.
3.Press the “Start (Pause)” button again. The new
programme continues at the same position where the
previous programme was interrupted. Do not add detergent
for this programme.
The “Reset/Drain” button cancels a programme before
the end.
•Press the “Reset/Drain” button for at least 3 seconds.
An animation appears on the display. The water is drained out.
It may last some time until you can open the door.
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Bauknecht Excellence 4480 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.
