Bedienungsanleitung Bauknecht GCX 5582 (Seite 8 von 15) (Englisch)

572360

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Before using the dishwasher/Connections

1. Removing the packaging

and controls:

After unpacking, make sure

that the dishwasher is

undamaged and that the

door closes correctly.

If in doubt, contact a

qualified technician or your

local retailer.

•

Keep the packaging

materials (plastic bags,

polystyrene parts, etc.) out of

reach of children, as they are

potentially dangerous.

•

This dishwasher has been

factory tested to ensure it

functions correctly.

Such testing may leave slight

water marks that will

disappear with the first wash.

2. Water and electrical

connections:

All water and electrical

connections must be carried

out by a qualified technician

in compliance with the

manufacturer's instructions

(refer to the enclosed

installation booklet) and

current local safety

regulations.

The appliance must only be

used in the household for

the prescribed uses.

Do not use the dishwasher if

it has been damaged in

transit. Consult your local

retailer or our After-Sales

Service.

(Refer to the separate

installation instructions

booklet)

3. Water inlet and drain:

•

Observe any special

regulations issued by your

local Water Board.

Water supply pressure:

0.3 - 10 bar.

•

Make sure the inlet and drain

hoses are kink-free and are

not crushed.

•

If the hose length is not

sufficient, please contact

your local dealer or our After-

Sales Service.

•

The inlet hose must be

securely clamped to the

water tap to prevent leaks.

•

The inlet water temperature

varies according to the model

installed. Inlet hose marked

“25°C Max”:

maximum temperature 25°C.

All other models: maximum

temperature 60°C.

•

When installing the

appliance, make sure the

drain water discharges

correctly (if necessary,

remove the wire gauze from

the sink siphon).

•

Fix the drain hose to the

spigot with a clamp to

prevent it from coming off

during operation.

For appliances with water-

stop system only: if the water

connections are made

correctly, the water-stop

system safeguards your

home against damage

caused by flooding.

4. Electrical connection:

•

Closely adhere to local

Electricity Board regulations.

•

Voltage information is shown

on the rating plate mounted

inside the door on the right

hand side.

•

The appliance must be

earthed as prescribed by law.

•

Do not use extension leads or

multiple adapters.

•

Before carrying out

maintenance, disconnect the

mains plug.

•

If necessary, the power cable

may be replaced with one the

same obtained from our

After-Sales Service. The

power cable must only be

replaced by a qualified

technician.

• For Austria:

if the apparatus

is series connected to a fault

current switch, this must be

sensitive to the pulsating

current.

4gb94602.fm Page 12 Tuesday, January 21, 2003 10:27 AM

Black process 45.0° 100.0 LPI

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht GCX 5582 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht GCX 5582

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info