Bedienungsanleitung Bauknecht GSF 7396 TW-WS (Seite 2 von 4) (Englisch)

457392

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

1. After loading the dishwasher, close the

door properly and open the water

supply tap.

2. Press the On/Off button to switch the

dishwasher on.

One of the programme

indicator lamps will switch on.

3. Select the desired programme by

pressing the corresponding button.

The

corresponding indicator lamp lights

up.

If required, select options (if supplied).

4. Press the Start button to start the

selected programme.

The Start

indicator lamp will light up.

Once set,

the programmed data cannot be

altered by pressing the programme

selector buttons.

Note:

Once the Start button has been

pressed, the dishwasher memorises the

last programme selected. This

information remains in the memory even

during interruption of the power supply.

To change the selected

programme, press the Start

button for about 5 seconds,

until

the Start indicator lamp

switches off.

Select a new

programme using the

programme selector knob and

press the Start button.

Note:

If the dishwasher is switched off

during a wash programme, when

switched on again it will resume the wash

cycle from where it was interrupted.

Only open the dishwasher door if

strictly necessary during a wash

cycle and exercise maximum

caution. Danger of scalding from

steam.

5. To indicate the end of the programme,

the Start indicator lamp switches off

and

the End indicator lamp (if fitted)

switches on

(for about 30 min.)

6. Once the Start indicator lamp has

switched off press the On/Off button to

switch the dishwasher off.

All the

indicator lamps switch off.

7. Open the door (warning: beware of hot

steam). Unload the lower rack before

the upper one. Close the water tap.

Upper rack

Half Load:

If only the upper rack is to be

loaded

remove

the cutlery basket from the lower rack and

place it in the upper one.

Rack height adjustment:

(The dishwasher is delivered with the upper

rack in the top position).

The rack height can also be changed

when loaded.

• To lower: pull out the

two

side

handles and gently lower the rack.

• To raise: pull up the

two

side handles

until the rack clicks into place.

• The rack must be level on both

sides.

Crockery Holders:

• Down: cups and long-stemmed glasses.

•

Up: plates.

"Vario Organizer” multi-purpose

support:

• To be used, for example, for long-

handled utensils

(arrange knives

with the blade facing downwards),

cups and glasses.

• May be used in three different

positions (see also “Dishwasher

loading instructions” on Page 4).

1. Upon the left-hand side of the rack.

2. Upside-down, towards the centre of

the rack.

3. Upside-down, towards the left side.

Glass holder:

Lower rack

Half Load:

Loading the lower rack

only

gives

greater washing power, especially for

plates and saucepans.

Plate holders:

• May be lowered to increase

available space (

• May be removed to increase available

space(

). To remove: pull the handle

up.

Cutlery basket:

The cutlery basket can be removed to

increase (

) available space.

How to use the dishwasher

Please read the user instructions carefully.

Upper and lower rack

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht GSF 7396 TW-WS Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht GSF 7396 TW-WS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info