TABLET
SETTING
This setting allows
to optimize the
cycle
performances
according the type
of detergent used.
Push the Tablet
button (the
indicator lights up)
if you are using the
combined
detergents in
tablet.
If you are using
powder or gel
detergent, the
Tablet indicator
on the control
panel has to be off.
DELAYED START
BUTTON
Push the button (repeatedly)
to delay the start of the
program. Adjustable from
0:30 to 24 hours. With each
press of the button, the
delay start increases by: 0:30
if selection below 4 hours,
1:00 if selection is below
12 hours, 4 hours if
selection is above 12 hours.
If 24 hours reached, and the
button is pressed, the
delayed start is deactivated -
“OFF” message is shown.
Then press the START
button. The delay time can
be adjusted after Start key
press. The dishwasher will
start after the set time.
START/PAUSE/
RESUME
BUTTON
Push this button to
start the selected
program: the
indicator lights up
and goes off at the
end of the program.
Press Start button or
open the door
during washing cycle
to pause the cycle -
the Start Indicator
blinks.
To resume the cycle
push Start button
and close the door.
CANCEL/OFF
BUTTON
Push this button to
switch off the control
panel.
If pressed for 3 seconds
when a program is
running it cancels this
program. If pressed
for 3 seconds when
the dishwasher is off,
it drains the water out.
If pressed during
program and delayed
start selection it
cancels the selection
and returns to
previous cycle and
option selection.
BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!
5019 400 00910
FOR ENERGY SAVING THE CONTROL PANEL DEACTIVATES AUTOMATICALLY AFTER 30 SECONDS IF NO CYCLE HAS STARTED.
WATER RECYCLING
INDICATOR
When lit, it indicates that the
program uses water recycling
system.
KEYBOARD LOCK
INDICATOR
When lit, it indicates that
keyboard lock is active.
WATER TAP CLOSED
- Alarm
Blinks when there is no inlet
water or water tap is closed.
WASH TIME DISPLAY
Indicates the cycle duration and the remaining time (h:min). With “Delayed start”
selected it indicates the time remaining until program start: “h24” if above
10 hours delay time remain and “h:mm” if below 10 hours delay time remain.
If “Fx Ey” messages appears on the display, see page 8 - chapter “What to do if...”.
DELAY INDICATOR
When lit, it indicates that delay
is active.
RINSE AID
INDICATOR
When lit (at the end of the
cycle), the rinse aid dispenser
needs to be refilled.
SALT INDICATOR
When lit (at the end of the
cycle), the salt reservoir needs
to be refilled.
PROGRAM
SELECTION
BUTTON
Push “P” button
(repeatedly) until
selected
program number
is shown on the
display (P1...Px) -
see “Table of
programs” - next
page.
After 3 seconds
the cycle
remaining time is
displayed.
POWERCLEAN
®
Thanks to the additional power
jets this option provides a more
intensive and powerful wash in the
lower rack, in the specific area.
MULTIZONE
Allows you to choose
the washing zones.
The appliance washes
both racks by default
(indicators are not lit).
To wash only in
specific rack, press
this button
repeatedly:
KEYBOARD
LOCK
This option allows you
to lock the buttons on
the control panel.
Children will not be
able to accidentally
start the dishwasher
by pressing the
buttons on the control
panel when this
option is selected.
If you want to activate
this option hold down
the button for
3seconds.
Repeat the same
operation to unlock
the panel.
only upper rack
indicator lit
only lower rack
indicator lit
ANTIBACTERIAL
RINSE
This function activates an
antibacterial rinse at the end of the
wash cycle, guaranteeing a further
reduction of bacteria.
Press the button to activate or
deactivate the function.
This function can be used with the
programs indicated in the table of
programs.
The dishwasher door must be
kept shut for the entire duration of
the program in order to guarantee
reduction of bacteria.
If the door is opened the indicator
lamp starts flashing.
MULTIZONE
INDICATOR
When lit, it indicates the wash
in the upper or lower rack
only.
