Bedienungsanleitung Bauknecht HIS3 EP8V2 IN (Seite 19 von 84) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

806779

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

.FAST PREHEATING

Turn the selection knob to the symbol to select the

fast preheating function and confirm by pressing the

selection/confirmation button: the settings are shown

on the display. If the proposed temperature is that

desired, press the selection/confirmation button. To

change the temperature, proceed as described in

previous paragraphs.

PRE

Once this phase has finished, an audible signal will

sound and the display will indicate that the oven has

reached the set temperature.

At this point, open the door, place the food in the

oven, close the door and start cooking.

At the end of preheating, the oven automatically

selects the conventional function: If you wish to set

a different cooking function, turn the selection knob

and select the desired function.

Please note: Placing the food in the oven before preheating

has finished may have an adverse effect on the final cooking

result. Opening the door during the preheating phase will

stop pause it.

The cooking time does not include a preheating phase.

You can always change the temperature you want the oven

to reach using the adjustment knob.

5. END OF COOKING

An audible signal will sound and the display will

indicate that cooking is complete.

Press the selection/confirmation button to continue

cooking in manual mode (without a programmed

cooking time) or turn the adjustment knob to extend

the cooking time by setting a new duration.

BROWNING

Some functions of the oven enable you to brown

the surface of the food by activating the grill once

cooking is complete.

PRESS

When the display shows the relevant message, if

required press the selection/confirmation button to

start a five-minute browning cycle.

You can stop the function at any time by turning the

selection knob to to switch the oven off.

. TIMER

When the oven is switched off, the display can be

used as a timer. To activate this function, make sure

that the oven is switched off and turn the adjustment

knob: The icon will flash on the display.

Turn the adjustment knob to set the length of time

you require and then press the selection/confirmation

button to activate the timer. An audible signal will

sound and the display will indicate once the timer has

finished counting down the selected time.

Please note: The timer does not activate any of the cooking

cycles. Use the adjustment knob to change the time set on

the timer; turn the selection knob to to switch the timer

off at any time.

COOKTOP OPERATION

(see the instructions supplied with the cooktop).

The oven control panel features 4 adjustable knobs

for cooktop operation.

The cooktop control knobs are marked with a

numerical scale corresponding to different power

settings, and a series of function symbols.

Please note: The multizone function can only be switched on

for the double and triple hotplates of the cooktop.

• Turn the control knob of the relevant hotplate

clockwise to the desired power setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht HIS3 EP8V2 IN Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info