Bedienungsanleitung Bauknecht IBBO 3C26 X (Seite 4 von 8) (Englisch)

806596

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).

MULTIZONE

If there are not many dishes to be washed, a half loading

may be used in order to save water, electricity and

detergent.

Select the program and then press the MULTIZONE

button: the indicator over the button lights up and the

symbol of the chosen rack will appear on the display.

By default the appliance washes dishes in all racks.

To wash only the specific rack, press this button

repeatedly:

shown on the display (only lower rack)

shown on the display (only upper rack)

shown on the display (option is OFF and the appliance will

wash dishes in all racks).

Remember to load the upper or lower rack only, and

to reduce the amount of detergent accordingly.

TURBO

This option can be used to reduce the duration of the

main programs while maintaining the same washing and

drying performance levels.

After selecting the program, press the TURBO button and

the indicator light will switch on. To deselect the option,

press the same button again.

KEYLOCK

A long press (for 3 seconds) of TURBO button, will

activate the KEYLOCK function. The KEYLOCK function

will block the control panel except the ON/OFF button.

To deactivate the KEYLOCK, long press again.

EXTRA DRY

To improve the drying of the dishes, after selecting the

program, press the EXTRA DRY button and the indicator

light comes on.

A higher temperature during the final rinse and an

extended drying phase allow for improving drying. To

deselect the option, press the same button again. The

EXTRA DRY option results in the lengthening of the wash

cycle.

TABLET (Tab)

This setting allows you to optimize the performance of

the program according to the type of detergent used.

Press the TABLET button (the indicator light will light up,

the corresponding symbol will light up) if you use

combined detergents in tablet form (rinse aid, salt and

detergent in 1 dose).

If you use powder or liquid detergent, this option

should be off.

DELAY

The start of the program may be delayed for a period of

time between 0:30 and 24 hours.

1.Select the program and any desired options. Press the

DELAY button (repeatedly) to delay the start of the

program. Adjustable from 0:30 to 24 hours. With each

press of the button, the delay start increases by: 0:30 if

selection below 4 hours, 1:00 if selection is below 12

hours, 4 hours if selection is above 12 hours. If 24 hours

reached, and the button is pressed, the delayed start is

deactivated.

2. Press the START/PAUSE button: the timer will begin

counting down;

3. Once this time has elapsed, the indicator light switches

off and the program begins automatically.

If at the time of the countdown the START/PAUSE button

is pressed again the DELAY option is cancelled and the

selected program starts automatically.

The DELAY function cannot be set once a program

has been started.

WATER TAP CLOSED – Alarm

Flashes when there is no inlet water or water tap is closed.

DRAIN OUT

To stop and cancel the active cycle, the Drain Out

function can be used.

A long press of START/PAUSE button, will activate the

DRAIN OUT function. The active program will be stopped

and the water in the dishwasher will be drained out.

ActivEco

ActivEco is a convection drying system which automatically opens the

door during/after drying phase to ensure exceptional drying

performance every day. Door opens at the temperature that is safe to

your kitchen furniture, thus door will not be opened when the option

of SANI RINSE or TURBO are on.

As additional steam protection, special designed protection foil is

added together with the dishwasher. To see how to mount protection

foil please refer to (INSTALLATION GUIDE).

ActivEco functionality could be disabled by the user as follows:

• To DISABLE: Switch On, then switch Off the machine. Keep the „P”

button pressed for 5 sec., at the end of 5 sec the dishwasher plays a

long beep. Switch On the machine, the display shows „oOF”

• To ENABLE: Switch On, then switch Off the machine. Keep the „P”

button pressed for 5 sec., at the end of 5 sec the dishwasher plays a

long beep. Switch On the machine, the display shows „oOn”

If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times

and beeps will sound. The option will not be enabled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht IBBO 3C26 X Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht IBBO 3C26 X

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info