Bedienungsanleitung Bauknecht KMT11 F45 (Seite 25 von 36) (Englisch)

793482

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

hot water and light washing-up liquid. All components and

the container are dishwasher safe, placing them in the top

basket of the dishwasher.

Make sure there are no milk residues on the hollow and

groove under the dial (

 g. 37)

6. Rinse inside the froth adjustment dial seat ( g. 38) and the

milk frother connector hole.

7. Check that the intake tube and spout are not clogged with

milk residues.

8. Replace the dial (lining up the arrow with the word IN-

SERT), spout and milk intake tube.

9. Place the milk container in the thermal casing.

10. Place the lid back on the milk container.

Cleaning the hot water/steam connection nozzle

Each time you prepare milk, clean the connection nozzle (A10) to

remove milk residues from the gaskets ( g. 23).

DESCALE

• Before use, read the instructions and the labelling on the

descaler pack.

• You should use descaler product available at after sales

service. Using unsuitable descaler and/or performing des-

caling incorrectly may result in faults not covered by the

manufacturer's guarantee.

Descale the appliance when DESCALING NEEDED PRESS OK TO

START (~45min) appears on the display (B): to descale

immediately, press and follow the instructions from

point 4.

To descale the appliance later, press . The symbol

appears on the display to remind you that the appliance needs

descaling (the message appears each time you turn the appli-

ance on).

To access the descaling menu:

1. Press (B2) to enter the menu;

2. Press (B10) or (B8) until DESCALE appears

on the display;

3. Press

on the display;

to start the descaling cycle then follow the in-

structions on the display;

4. Empty the water tank (A12). Press ;

5. ADD DESCALER (LEVEL A) AND WATER (UP TO LEVEL B) ( g.

40); Pour the descaler into the tank up to the level A marked

inside the tank, then add water (one litre) up to level B and

put the water tank back. Press ;

6. EMPTY GROUNDS CONTAINER and DRIP TRAY ( g. 27): re-

move, empty and replace the drip tray (A14) and grounds

container (A4). Press ;

7. PLACE 2,5 l CONTAINER UNDER SPOUTS PRESS OK TO START

DESCALING :

Place an empty container with a minimum capacity of 2.5

litres under the hot water/steam spout (C4) and co ee

spouts (A13) ( g. 8);

WARNING

Hot water containing acid  ows out of the hot water/steam

spout. Take care to avoid contact with splashes of this solution.

8. Press to con rm that you have added the descaling

solution. DESCALING UNDERWAY, PLEASE WAIT appears on

the display. The descale programme starts and the descaler

liquid comes out of the hot water/steam and co ee spouts.

A series of rinses and pauses is performed automatically to

remove all the scale residues inside the co ee machine;

After about 25 minutes, descaling stops:

9. RINSE AND FILL WATER TANK UP TO MAX LEVEL: the ap-

pliance is now ready to rinse with drinking water. Empty

the container used to collect the descaler solution. Extract

the water tank, empty, rinse under running water,  ll with

drinking water up to the MAX level and put back in the ap-

pliance;

10. PLACE 2,5 l CONTAINER UNDER SPOUTS, PRESS OK TO START

RINSING: Place the container used to collect the descaler

solution empty under the co ee spouts and hot water/

steam spout ( g. 8) and press ;

11. Hot water is delivered  rst from the co ee spouts, then

from the hot water/steam spout and RINSING UNDERWAY,

PLEASE WAIT is displayed;

12. When the water in the tank has run out, empty the contain-

er used to collect the rinsing water;

13. (If the  lter is installed) INSERT FILTER INTO ITS HOUSING

( g. 42). Press and extract the water tank. Re-

place the water softener  lter if removed previously;

14. RINSE AND FILL WATER TANK UP TO MAX LEVEL: Fill the tank

up to the MAX level with drinking water;

15. INSERT WATER TANK ( g. 6): Put the water tank back in the

appliance;

16. PLACE 2,5 l CONTAINER UNDER SPOUTS, PRESS OK TO START

RINSING :

Place the container used to collect the descaler solution empty

under the hot water/steam spout ( g. 8) and press ;

17. Hot water is delivered from the hot water/steam spout and

RINSING UNDERWAY is displayed.

18. EMPTY DRIP TRAY ( g. 27): At the end of rinsing, remove,

empty and replace the drip tray (A14) and grounds contain-

er (A4). Press ;

19. DESCALE COMPLETE : press ;

20. FILL TANK WITH FRESH WATER : empty the container used to

collect the rinse water, remove the water tank and  ll with

drinking water up to the MAX level, then put back in the

appliance.

Descaling is complete.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht KMT11 F45 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht KMT11 F45

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info