FINDKNSGRIPENLFGBD
5019 400 00205 Printed in Italy 12/12
What to do if... Possible causes: Cures:
The control panel is switched
off, the appliance does not
work.
There may be an appliance power
supply problem.
The appliance could be in
On/Standby mode.
Make sure:
- there is not a power outage
- the plug is properly inserted in the
power socket and the mains double-
pole switch (if present) is in the
correct position (i.e. allows the
appliance to be powered)
- the household electrical system
protection devices are efficient
- the power cable is not broken.
Activate the appliance with the Temp.
button.
The inside light does not
work.
The light may need replacing.
Malfunction of a technical
component.
Contact an authorized Service
Centre.
The inside light flashes. Door alarm active
It is activated when the
refrigerator compartment door
remains open for a prolonged
period of time.
To stop the alarm, close the
refrigerator door.
On reopening the door, check the
light works.
The temperature inside the
compartments is not low
enough.
There could be various causes
(see "Solutions")
Make sure:
- the doors close properly
- the appliance is not installed near a
heat source
- the set temperature is adequate
- the circulation of air through the
vents at the bottom of the appliance
is not obstructed
There is water on the
bottom of the refrigerator
compartment.
The defrost water drain is
blocked.
Clean the defrost water drain hole
(see the section "Appliance
Maintenance and Cleaning")
The front edge of the
appliance, at the door striker
seal, is hot
This is not a defect. It prevents
condensation from forming.
No solutioin is necessary.
One or more green lights
flash continuously.
Malfunction alarm
The alarm indicates a fault in a
technical component.
Call the authorised Service Centre.
