Bedienungsanleitung Bauknecht TSenseD8X2SK (Seite 1 von 4) (Englisch)

703637

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:

• Visiting our website - docs.bauknecht.eu

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product’s identi cation plate.

THANK YOU FOR BUYING A BAUKNECHT PRODUCT.

In order to receive a more complete assistance,

please register your product on

www.bauknecht.eu/register

Quick guide

Before using the appliance carefully read the Safety Instructions.

xxxxxxxxxxxx

xxxx

Eco Monitor

This indicator shows the energy consumption level according to

the programme and the options set. The consumption is

proportional to the lines on the display,by the ecomonitor icon.

OPENING OF THE DOOR DURING THE CYCLE

During operation, it is possible to open the door. After having closed

it, press the button Start/Pause again to restart the dryer.

NAVIGATION

The "UP" and "DOWN" buttons serve to navigate the available

menus.

Press the button to conrm the selection.

Press the option button at the symbol , where present on the

display, to return to the previous screen.

If no selection is conrmed, after about 2 minutes, the display

return to the main screen.

SETTINGS

To access the settings menu, keep the relevant button pressed for some

seconds.

Set language shows the available languages on the display.

Sounds allows to enable or disable the sounds (some sounds, as

warnings, will remain active anyway).

Brightness allows to modify the display brightness.

Factory Default allows to reset the default settings. After having selected

the setting, keep the button pressed for some seconds.

PROGRAMMES

1.Mixed kg 4

This programme is ideal for drying cotton and synthetic fabrics

together.

FIRST TIME USE

When starting the appliance for the rst time, the control panel

will show the set language menu automatically. The UP and

DOWN buttons serve to show the languages available in the

machine. Press the button to conrm. The machine cannot be

used without having selected the language.

Make sure that the water tank is correctly inserted. Make sure

that the drain hose on the back of the dyrer is properly xed,

either to the dryers's water tank or to the domestic sewage

system.

The dryer must be installed in a room with a temperature

ranging between 5°C and 35°C to ensure proper operation.

Before you use your dryer ensure that it has been in a upright

position for at least 6 hours.

Should you wish to change the opening side of the door, please

contact our After-sales Service. (See phone number in the

warranty booklet).

DAILY USE

Doing this will keep your machine working at its BEST!

Remember to empty your water tank after each drying cycle.

Remember to clean your lters after each drying cycle. (Refer to

section Care & Maintanence).

1. Open the door and load garments. Always refer to instructions

on clothing labels and the max loads indicated in the programme

section. Empty pockets. Make sure garments do not get caught

between the door and/or the door lter.

2. Close the door.

3. Press the button On/O.

4. Select the programme according to the laundry type with the

apposite knob.

5. Select the options, if necessary.

6. To start the cycle, press the Start/Pause button.

7. At the end of the drying cycle, a buzzer will beep. An indicator on

the control panel signals the end of the cycle. Pull the load out

immediately to prevent the formation of creases on laundry.

8. Turn the machine o by pressing the button On/O, open the

door and pull clothing out. If the machine is not switched o

manually, after about a quarter of an hour from the cycle end, the

appliance turns o automatically to save energy.

If this last stage is not carried out immediately, some machines

and/or some programmes/options are equipped with Crease Care

system. For some hours, after the end of drying, the drum rotates

at regular intervals to prevent the formation of creases.

In case of power failure, it is necessary to press the button Start/

Pause to restart the cycle.

*MAX LOAD 8 Kg (dry load)

CARE LABEL

Always check the care labels, especially when placing garments in

the tumble dryer for the  rst time. Below are the most commonly

used symbols:

May be tumble dried.

Do not tumble dry.

Tumble dry – high heat.

Tumble dry – low heat.

CONTROL PANEL

1 On/O Button

2 Start/Pause Button

Options Buttons

3 Active Care

4 Cycle end Signal

5 Crease Case (Add favourite if long pressed)

6 Cycle Options (Setting if long pressed)

7 Dryness Level

8 Timed Drying

9 Start Delay

Navigation buttons and Key Lock

10 UP

11 DOWN'

12 CONFIRM (Key Lock if long pressed)

INDICATORS

Cycle Phase: Drying - Cool Down - END End of Cycle

Empty water tank - Clean door lter - Clean bottom lter - Eco Monitor

Refer to troubleshooting section: Failure: Call after sales service.

DEMO

Demo Mode

SYNTHETICS

1:35

-:--

8 9

3 sec

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht TSenseD8X2SK Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info