Bedienungsanleitung Bauknecht wa 2140 (Seite 9 von 19) (Englisch)

305928

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Indicates the current programme step.

The indicator moves from left to right after the

programme start through “Wash”, “Rinse” and

“Spin”. At the end of the programme the indicator

returns to its initial position on the left side.

DOOR LOCK

When you start the programme the door is

automatically locked until the programme

terminates.

“Door closed” indicator lights up.

Exception:

When running the “Cotton” and “Easy

care/Synthetics” programmes (without prewash)

the door can be opened for adding further laundry

during the first 15 minutes. If “Short/Rapid” (Quick

wash) has been selected, however, this is not

possible.

If the programme selector knob is turned to the “0”

position or the power supply is interrupted, the door

unlocks automatically after about 2 minutes.

PROGRAMME END

Programme end is indicated by the fact that

the programme sequence indicator is no

longer visible.

the “Door closed” indicator is switched off.

Cancel the selected special functions by

pressing the appropriate button again.

Set the programme selector on "0".

The pilot lamp switches off.

Open the door and remove the load.

Turn off the tap(s).

Note:

Leave the door ajar so that the drum can dry.

PROGRAMME RESELECTION

CONTINUING WITH A NEW PROGRAMME

OR TEMPERATURE SETTING

1. Select the new programme or

temperature setting.

2. Hold down the “Start” button for about

one second.

The new programme continues with the

same programme step at which the previous

programme was interrupted.

CANCELLING THE CURRENT PROGRAMME

AND RESTARTING WITH A NEW ONE

Do not put more detergent into the machine for

the new programme, since almost no water is

drained out when a programme is cancelled.

1. Hold down the “Start” button for 5 seconds,

or until the programme control audibly

restarts.

2. Wait until the programme sequence

indicator has returned to its initial (leftmost)

position and has disappeared.

3. Set the programme selector to “0”.

4. Select the new programme, temperature

and any special options desired.

5. Hold down the “Start” button for one second.

TO INTERRUPT/PAUSE A PROGRAMME

To interrupt the current programme for a certain

time and resume it later:

Set the programme selector to “0”.

After the desired time, reselect the programme.

Hold down the “Start” button for about one

second.

The programme continues.

TO STOP A PROGRAMME BEFORE THE

END AND DRAIN

To stop a programme before the end and drain

the water:

Set the programme selector to "Drain".

Hold down the “Start” button for about one

second.

The machine drains.

Only open the door when the programme

sequence indicator has returned to its initial

(leftmost) position and the “Door Closed”

indicator is off.

PROGRAMME SEQUENCE INDICATOR

DOOR LOCK / PROGRAMME END

PROGRAMME RESELECTION / INTERRUPTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht wa 2140 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht wa 2140

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info