Bedienungsanleitung Bauknecht WA 7575 (Seite 9 von 18) (Englisch)

449643

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Notes:

• You can use liquid detergent in the “Prewash”

phase for programmes with this option. In this

case use only powder detergents for the main

wash.

• If the “Start Delay” option is used, put liquid

detergent into the drum with a detergent ball.

• When using concentrated fabric softeners,

add water in the detergent dispenser up to

“MAX” level mark.

• To prevent dispensing problems when using

highly concentrated powder and liquid detergents,

use the special detergent ball supplied with the

detergent and place it inside the drum.

Dyeing: Usual products consist of dye colour,

fixing agent and salt. Pour the dye colour, the

fixing agent and then the salt directly into the

empty drum. Fill in the laundry only afterwards.

• Use exclusively dyes and bleaches

recommended for washing machines.

• Follow the Manufacturer’s instructions.

• Plastic and rubber parts of the machine may

be stained by dyes or bleaches.

See also separate programme overview.

1. Set Programme Selector to the desired

programme. The indicator above the “Start/

Pause” button flashes and the programme

duration is shown on the display (if available).

2. Select additional options, if desired, pressing

the corresponding button.

The indicator for the option is lit up.

N.B.An audible tone is sounded if the

combination of programme and additional

option does not make sense. Unsuitable

combinations of additional options are

deselected automatically.

• By a further pressing of the button the

additional option can be turned off again.

• The Final Spin Speed is related to the

selected programme and is shown by means

of the indicator lamp.

• The Final Spin Speed can be altered by

pressing the “Spin” button.

• In some programmes the maximum final spin

speed is limited to go easy on your laundry

items. Selection of a higher spin speed is not

possible.

• If “0” is selected, the laundry is not spun

following the final rinse cycle. The water is

simply pumped out. Intermediate spinning is

carried out at reduced speed.

Press the “Start/Pause” button to start the

program

(If available)

1. Select the program and temperature, any

additional options and the spin speed.

2. Press the “Start Delay” button. The

associated lamp comes on and the indicator

above the “Start/Pause” button flashes.

Either keep the start delay button pressed or

else press it repeatedly until the desired

number of hours is reached. If the maximum

number of hours is reached for the delayed

start, further pressing of the button starts the

counter at zero again.

3. Press the “Start/Pause” button in order to

start the program.

• The start delay hours can be corrected even

after the “Start/Pause” button has been

pressed. Again here either keep the “Start

Delay” button pressed or else press it

repeatedly until the desired number of hours is

reached. Once the display has counted down

to “00” the selected programme is started.

• Cancelling the start delay: If, in fact, no start

delay was actually desired turn the

programme selector switch and then set it to

the desired position. The remaining time of the

selected programme is displayed and the

indicator above the “Start/Pause” button

flashes. The programme can now be started

immediately by pressing this button.

• If the programme is changed after the start

delay, the start delay option is cleared and the

remaining time is displayed. The indicator

above the “Start/Pause” button flashes.

The programme is not started.

Note: With liquid detergent, a dosing aid placed

directly in the drum should be used if a start delay

has been selected.

DETERGENT AND ADDITIVES

DYEING AND BLEACHING

PROGRAMME SELECTION / PROGRAMME START

START DELAY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht WA 7575 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht WA 7575

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info