5019 401 15306
Add the detergent as described in the programme table or in the
chapter “Detergent and Additives” in your Instructions for Use.
1. Press
“On/Off”
to switch on the washer. The light of the selected
programme is on, and the
“Start (Pause)”
button blinks.
2. Turn the
programme selector
to the desired programme -
it is marked by a light.
3. The predefined
temperature
and
spin speed
can be altered
pressing the “Temperature” and the “Spin speed” modifier.
Selecting any opti
combination of programme, options
the indication lights switch off automatically and a signal sounds.
“Eco” button
• The duration of the wash is extended and the temperature
reduced. This saves you energy and maintains good washing results.
“Easy ironing” button
• Reduces creasing by increased water quantity and a very gent
“Rinse hold” button
• The laund
this prevents creasing and colours from changing.
• Thirecommended for the programme
“Synthetics” or “Delicate”.
• Pto postpone spinning to a later
time, or if you want to drain only
• Do not leave the laundry to soak in the rinse hold for too long.
Note:
The programme starts to “Rinse hold” when the “Rinse hold”
button light blinks; the
“Start (P
button light also blinks.
T
• P
“Start (Pause)”
button ; the
programme will terminate automatically with the final spin
cycle for the present wash programme.
• If you do not wish to spin the clothes, press and hold the
“Reset (
button for a few seconds. The water is
drained out then, before the door can be opened.
“Spin speed” modifier
• Every programme has an automatic predefined spin speed.
• P
• Spin speed “0” is only selectable for programme “Spin &
Drain
drained out only at the end of the programme.
“Rinse” modifier
• “Sensitive skin
rinse cycle is prolonged.
• “Intensive rinse”: more rinse water is added, and rinse cycle is
prolonged.
• P
clothes or to help people with skin allergies.
CONSUMPTION DATA
Pro
Te m p e r a t u r e
(°C)
Load
(kg)
Wa
(l)
Energy
(kWh)
Approximate programme duration
*
(hours : minutes)
Cotton (Antibacterial) 95 11.0 95
**
3.38 3:10
Cotton with “Eco”
***
60 11.0 86 1.87 2:51
Cotton 60 11.0 89.2 1.92 2:15
Cotton 60 5 55 1.22 1:40
Cotton 60 3 45.5 1.03 1:25
Cotton 60 1 35 0.73 1:00
Coloured
***
40 10.0 86 0.90 2:36
Coloured 40 5.5 57 0.69 1:39
Coloured 40 3.5 43.3 0.58 1:27
Coloured 40 1.0 26.1 0.39 0:40
Synthetics 40 5.5 69.0 0.60 1:53
Synthetics 40 3.0 42.1 0.60 1:23
Jeans 40 11.0 117.5 0.97 2:00
Daily 40 6.0 60.9 0.81 1:00
Quick wash 30 6.0 43.8 0.44 0:30
Sport 30 5.5 61.3 0.51 1:31
Big items 40 4.0 83.7 0.83 1:18
Delicates 30 4.0 79.6 0.50 0:52
W 40 3.0 68.6 0.78 0:43
Handwash 30 3.0 97 0.49 0:38
SuperEco 60 11.0 95.8 1.54 5:09
Prewash cycle increases programme durati
with Standard IEC/EN 60 456. Consumption data in the home may vary with respect ater su
and temperature, the load and the type of wash.
*
The remaining time indicator can deviate
**
Tut
***
ADD DETERGENT, CLOSE THE DOOR AND
SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION OR MODIFIER
“Options” modifier
Pre
• Adds a prewash cycle to the programme selected.
• Use only for heavily soiled loads (e.g. sand, granular dirt).
• Increases the cycle time by approx. 15 minutes.
• Do not use liquid detergent for the main wash when activating
“Prewash”.
Clean +
• Choose this option if you use an in-wash additive for stain
removal (powder
• Optimizes the additive's efficiency to get better
performance and stain removal.
• Select temperature of 30 or 40°C and use with maximum load.
• Add an appropriate amount of in-wash additive for stain
removal (powder) to the prewash chamber
• Appropriate for use
basis.
Chlorine or perborate bleaches must not be use
Normal
“Soil level” modifie
• Adapts the programme duration to the soil level of your laundry
If there is a programme setting which you use frequently, the
washing machine offers the possibility to save one setting for each
programme so that it can be used again by just pushing one button.
• Select the desired programme, temperature, spin speed and
options/modifiers.
Press and hold the
“Favourites”
button for some seconds; the light
goes on and a signal sounds when the programme setting is sav
Next time you want to u
programme selector to th
shortly
push the
“Favourites”
button and start by pressing
“Start (Pause)”
.
If you want to replace the saved setting by another one:
• Select the programme desired and the new temperature, spin,
options/modifer setting.
•P
“Favourites”
button for at least 3 seconds;
the previously saved s
The “Start delay” allows to run the machine at the cons
convenience, for example at night when electricity is cheaper.
• Select programme, temperature and options/modifi
• Press the “Start delay
•P
“Start (P
button ; the
countdown of the delay time begins. The light of the “Start
delay
• The time delay indication disappears
starts and it is replaced by the remaining time.
To cancel the “Start delay”:
•P
“Reset (Drain)”
for at least 3 seconds, or set the delay
time to “0:0” - the delay time will disappear from the display
after a few seconds.
Turn on the tap and press and hold the
“Start (Pause)”
button
- the button's light stops blinking and goes on; it will take some time
until water enters into the washing machine.
The programme sequence indicator on the display shows the
sequence reached in the programme. After starting the
programme, the indication runs from left to right through “Add
garment”, prewash, wash, rinse, spin. When a programme
sequence is finished, the corresponding symbol goes off.
The display shows the remaining programme time. Due to
variations in load and temperature of inlet water, the remaining
time is newly calculated in certain programme phases. If this is the
case, an animation appears on the display and the and the
“Dynamic Sense” symbol lights up.
As soon as a programme starts, the “Door locked” symbol l
up on the display.
You can interrupt the programme by pressing
“Start (Pause)”
- the light blinks. The “Door locked” symbol
off and you can open the door. In certain programme phases, the
“Door locked” symbol remains lit to show that the door cannot
be opened in the present programme phase, e.g. when th
level is too high or during spinning
As long as the “Add garment” symbol lights up on the display,
you can add more washing: press
“Start (Pause)”
, open the
door, add your washing, close the door and press
“Start (Pause)”
to continue the programme.
“End” appears on the display, and a signal sounds.
1. Sw
“On/Off”
.
2. Turn off the tap and open the door to unload your washing. Leave
the door open for some time so that the washer’s inside can dry.
1. Press the
“Start (Pause)”
button to interrupt the
programme. The light blinks.
2. Select the new
modifiers as desired.
3. Pres
“Start (Pause)”
button again. The new
programme continues at the same position where the
previous programme was interrupted. Do not add detergent
for this programme.
Press and hold the
“Reset (Drain)”
button for a few seconds; the
light blinks. It will take some time until any existing water is drained
out and the door can be opened (up to 10 minutes). Caution, the
washing cou
SA
START DELAY
➡
➡
➡
PROGRAMME START
ADD W
PROGRAMME END
CHANGE THE PROGRAMME, TEMPERATURE,
OPTIONS AFTER PROGRAMME START
RESET A RUNNING PROGRAMME BEFORE
THE END
The Sensor Technology automatically adapts programme time, water and energy consumption to the size of your wash load.
