Bedienungsanleitung Bauknecht wak 1300 (Seite 11 von 14) (Englisch)

304909

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Fault display table

Fault in the water supply

The appliance has no or

insufficient water supply.

For models with a fault display,

the

“Tap Off”

display lights up

and the spin speed indication

LED flashes. If a digital display is

fitted, “H

” and “F” are also

displayed alternately.

For models with no fault display,

the washing machine stops in the

appropriate programme step.

Switch the appliance off and pull

out the mains plug.

Check whether:

•

the water tap is fully turned

on, and the water supply

pressure is sufficient

•

the water inlet hose is kinked

•

the water connection mesh

filters are blocked (see “Care

And Maintenance”/”Mesh

Filters in the Water

Connection”)

•

the water supply hose is

frozen up

•

the washing machine has a

safety hose and the safety

valve is open (red indicator in

the safety valve inspection

window); In this case replace it

with a new safety hose

Reconnect the appliance to the

electrical socket.

For models with a fault display,

reselect the desired programme

and start it.

For models without a fault

display continue the programme

by pressing the “On/Off” button

again.

If the fault occurs again, please

contact After-Sales Service (see

“After-Sales Service”).

Draining fault

Waste water not pumped out.

For models with a fault display,

the spin speed indication LEDs

flash. If a digital display is fitted,

“P

” and “F” are also displayed

alternately.

For models with no fault display,

the washing machine stops in the

appropriate programme step.

Switch the appliance off and pull

out the mains plug.

Check whether:

•

the drain hose is kinked

•

the pump or the filter is

blocked (see “Removing The

Filter”)

IMPORTANT:

before

draining, make sure that the

water has cooled down.

•

The water in the drain hose is

frozen up

Reconnect the appliance to the

electrical socket.

For models with fault display,

select and start the “Drain/

Cancel” programme.

To rinse the laundry, we then

recommend a short programme

without the addition of

detergent.

For models without a fault

display continue the programme

by pressing the

“On/Off” button again.

If the fault occurs again, please

contact After-Sales Service (see

“After-Sales Service”).

Fault in an electrical

component

The appliance stops in the middle

of a programme.

For models with a fault display,

the spin speed indicator LEDs

flash. If a digital display is fitted,

“F4

” to “F16” are also displayed.

Switch the washing machine off.

First of all select and start the

“Drain/Cancel” programme.

Then select and start the desired

programme again.

For models with no fault display,

the washing machine stops in the

appropriate programme step.

First switch the washing machine

off and on again to continue

with the programme.

If the fault persists, please

contact After-Sales Service (see

“After-Sales Service”).

“Water Stop” fault

(if

fitted)

The “Water Stop” fault may have

been triggered by:

excess foaming

a leak in the washing machine.

In this case the pump is switched

on automatically in order to

pump the water out.

For models with a fault display,

the “Water Stop” indicator lights

up and the spin speed indicator

LEDs flash. If a digital display is

fitted, “A

” and “F” are also

displayed alternately.

For models with no fault display,

the washing machine stops in the

appropriate programme step.

Switch the appliance off, pull out

the mains plug and turn the

water tap off.

Tilt the appliance forwards

carefully to allow the collected

water to flow out from the

bottom of the appliance.

Luminous display

Spin

speed

lights

Digital display

(if fitted)

Fault description

“Water tap” flash “H” and “F” “Fault in water supply”

- flash “P” and “F” “Draining fault”

- flash from “F4” to “F16” “Fault in an electrical component”

“Water Stop” flash “A” and “F” “Water Stop fault”

4gb15161.fm5 Page 26 Tuesday, March 19, 2002 6:16 PM

Black Process Plate

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht wak 1300 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht wak 1300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info