Bedienungsanleitung Bauknecht wats 5550 (Seite 12 von 17) (Englisch)

306045

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

Appliance exterior and

control panel

•

Clean with a soft damp cloth.

•

If necessary, a neutral

household cleaner can be

applied (do not use aggressive

or abrasive products).

Lid seal

•

Clean from time to time with a

damp cloth.

Water inlet hose(s)

•

Check the hose regularly for

brittleness and cracks. Replace

if necessary.

Troubleshooting Guide

This washing machine is

equipped with automatic safety

functions which detect and

diagnose faults at an early stage

and allow you to react

appropriately.

Often, however, the faults

detected are small enough to be

solved in a matter of minutes.

For example:

The appliance will not start,

no lamp lights up.

Check whether:

•

the appliance is plugged in;

•

the wall socket is functioning

correctly

(use a table lamp or similar);

•

a programme is selected

correctly.

The appliance will not start,

but the “Start/Pause” lamp

is flashing.

Check whether:

•

the programme has been

changed;

•

the appliance lid is properly

shut. Open and shut it again.

The appliance stops during

the programme.

Check whether:

•

the

“Rinse Hold”

lamp is on,

terminate this option by

pressing the button again;

•

another programme has been

selected. Reselect the desired

programme and press the

“Start/Pause”

button;

•

the

“Start/Pause”

lamp is

flashing. Press the

“Start/

Pause”

button;

•

the safety system of the

appliance was activated.

See fault description table.

Detergent and additive

product residues in

dispenser at end of wash.

Check whether:

•

the detergent dispenser is

properly installed and is not

blocked (see “Care and

Maintenance”);

•

the mesh filter in the water

inlet hose is not blocked (see

“Care and Maintenance”).

The appliance vibrates

during the spin cycle.

Check whether:

•

the appliance is level and that

all the feet are adjusted (see

“Installation”);

•

the transport bracket has been

removed. Before starting up

the appliance, the transport

screws and the transport

bracket MUST be removed (see

“Installation”).

Final spin results are poor.

Check whether:

•

the pump impeller is

obstructed (see “Cleaning the

Foreign Body Trap”).

•

if the laundry is still too wet at

the end of the programme:

possibly add other items of

clothing and repeat the spin

cycle.

•

there is foam on the washing:

repeat a rinse-spin cycle and

avoid excessive quantities of

detergent.

Note:

The appliance has an imbalance

detection and correction system.

If individual heavy items are

loaded (a bathrobe, for

example), this system may reduce

the spin speed automatically or

interrupt the spin if it detects too

great an imbalance at the start of

the spin, in order to protect the

appliance.

Excessive foam formation may

also prevent spinning.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht wats 5550 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht wats 5550

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info