Bedienungsanleitung Baumatic AS 19 SS (Seite 12 von 32) (Englisch)

76634

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

END OF COOKING SEMIAUTOMATIC OPERATION

For fixed-time cooking

Switch on the oven; press button and set the end of cooking time, within the next 23h59m,

23h59m, with buttons - and +. Wait until the 2 dots on the timer display stop flashing and

the timer shows the current hour; then select an available cooking function: the oven will suggest

a preset temperature, which can be changed using buttons and ; wait until the 2 dots

on the timer display stop flashing, then the timer shows the current hour and the oven

starts cooking. When the fixed time has elapsed, the oven stops cooking.

AUTOMATIC OPERATION

For fixed-time cooking

Switch on the oven; press button and set the required cooking time with buttons - and +.

Wait until the 2 dots on the timer display stop flashing, then the timer shows the current hour;

then press button and set the end of cooking time with buttons - and +. Wait again until

the timer shows the current hour, then select an available cooking function: the oven will

suggest a preset temperature, which can be changed using buttons and . When the 2

dots on the timer display stop flashing, the oven begin the delayed start mode: then, it will

automatically start for the requested duration and stop at the requested time. During the delayed

start phase, both the temperature and the function will remain displayed and they can be changed.

When the time of cooking is over, a triple acoustic signal starts while temperature and functions

displays go off, the timer display shows the time and the two Pot and Auto symbols start flashing.

To reset the oven, press any of these buttons: ; the acoustic signal stops

and the oven is ready to receive new commands; it is possible to immediately select a new cooking

function, or switch the oven off.

TIMER DISPLAY SYMBOLS

Pot: when it lights up, it indicates that a cooking function is on, even in manual mode.

The pot does not light up when "light", "preheating" and "defrost" functions are activated.

When the pot is flashing, it indicates that the time cooking is over.

During the delayed start phase, it remains off and then lights up again when the cooking time

has been completed.

A (auto): when it lights up, it indicates that a cooking time setup has been selected (in other

words, the oven is not in manual mode). When flashing, it means that the cooking time is over.

Bell: when it lights up, it indicates that the minute minder is on. When flashing, it indicates

the end of the minute count.

SELECTING THE COOKING TEMPERATURE

When using buttons and , the temperature increases between the low and high setting

for each cooking mode with +/- 5 degrees increases (shown on the temperature display).

SELECTING THE COOKING MODE

When using buttons and , the program icons light up alternately from left to right.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Baumatic AS 19 SS Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info