Bedienungsanleitung Baumatic AS27SS (Seite 7 von 16) (Englisch)

76100

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

INSTRUCTIONS FOR USE

Important: Before cooking with the appliance for the first time, it is important to clean the cook top. Then turn

on all the heating elements, one as a time, with no pan on top, for 5 minutes on the maximum temperature

setting. This will eliminate to the "new smell" and make any humidity that had accumulated on the heating

elements evaporate. This is also essential to ensure that the electronic devices function properly.

CERAMIC GLASS COOK TOP WITH TOUCH CONTROLS

1. Description of the controls (Fig 6)

1.On/off key (ON/OFF)

2. Safety lock key

3. Safety lock pilot light

4.“More” key

5.“Less” key

6. Setting display (residual heat)

7. Decimal point on setting display (preheating)

8. Dual-circuit key (ON/OFF)

9. Dual-circuit pilot light

10.“More” key Timer programming

11.“Less” key Timer programming

12.Timer programming displays

13. Timer programming pilot light

Touch controls

All operations are performed by means of touch controls (infrared sensors) situated on the front of the cook

top; there is a display relating to each key.

Every action is confirmed by an acoustic signal.

Locking the cook top functions (Fig 6)

The whole appliance can be locked using the safety lock key (2), in order to prevent any unintentional use.

The function also serves as a child safety device. A pilot light (3) indicates that the safety lock function has

been enabled.

it will still be enabled when the cook top is turned on again.

As long as the safety lock function is enabled, any action on the keys has no effect.

2. Turning on and off (Fig 7)

1. Touch the on/off button.(1)

The control is enabled: the setting level indicators (6) read “0”.

The next step must be carried out within 10 seconds, otherwise the appliance goes off automatically.

Turning on the burner (Fig 8)

After touching the on/off key (1), a burner must be selected within 10 seconds as follows:

Touch the “Plus” (4) and “minus“ (5) keys for the burner required.

Adjust the setting from 1 to 9 by means of the “+” and “-“ keys (5/4).

The “+” and “-“ keys have a repeat function: pressing and holding one of these keys induces an increase or

decrease in the setting value of one unit.

If the selected cooking zone will be switched ON by means of the MINUS key(4), the cooking zone starts at the

maximum setting “9“. When setting “0” is reached, there will be no further setting changed.

Turning off the burner

1.The burner must be on.

2.Bring the setting down to “0” by means of the “-“ key (4). After 3 seconds, the burner goes off

automatically.

If the cooking zone is “hot” “0” is displayed alternatively with “H”

Turning off the burner instantly:

1.The burner concerned must be on.

2.If you touch the “+” and “-“ keys (5-4) simultaneously, the burner goes off immediately.

If the cooking zone is “hot” “0” is displayed alternatively with “H”.

Residual heat indicator (Fig 9)

As long as the temperature of the burner remains high enough to cause injury, the display corresponding to

the burner shows the “H” symbol (residual heat)

alternatively with “0” symbol. This indication only disappears

when there is no longer any danger (at 60°C).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Baumatic AS27SS Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info