USER INSTRUCTIONS
INSTRUCTIONS FOR USE
These User Instructions should be retained for future reference and for use by a person who is
perhaps unfamiliar with the appliance.
The following models are covered by these instructions:
B60 B68
B17.5
P68
B
C45
B61
B69
B17.6
P75
BF45
B62
B16.5 B17.7
P90
AS24
BT62
B16.6
PG2
PF75
AS25
B64
BG2
PWK1
B44
B67
BWK1
P62
B46
USING THE HOB
The symbols on the Control Panel fascias show which burner the Control Knob operates.
Dependent on the mo
del there are two methods for igniting the burners.
1. Auto Ignition
After pressing in and turning the appropriate knob anti
-
clockwise to the large flame
symbol, the ignition spark will operate as long as the knob is pressed down.
When a flame has been established the knob can be released.
2. Manual Ignition
After pressing in and turning the appropriate knob anti
-clockwise to the large flame
symbol, press the ignition button located on the control panel.
The ignition spark will operate as long as the button is held down. When a flame has
been established, release the button.
To regulate the flame, continue turning anti
-clockwise to the required setting between the large
and small flame symbols.
To turn the burner off, turn fully clockwise.
NOTE:
When a Thermocouple Safety Device is incorporated in the appliance, it is necessary for the
knob to be continuously held down for a further period of approximately 10 seconds after the
flame has been
established to enable the thermocouple to function.
The Safety Device is designed to stop the flow of gas to the burner head in the event of a flame
out situation.
Please note that this appliance carries the
CE
mark for normal domestic use and is not suit
able
for the marine environment.
6
