18
o Never select a knob position between the maximum and off
o The symbol on the control panel, next to the control knob will
o Press in and turn the appropriate control knob anti-clockwise to
o Whilst pressing in the control knob, press and hold down the
o The ignition spark will operate, you should hold down the ignition
il the flame is at a suitable level. The
operating position MUST be at a position between the maximum
To switch the burner off, turn the control knob fully clockwise to
o In case of power failure, the burners can be lit by carefully using
ushbutton ignition with flame failure safety device
ame failure safety device on each
urner, which is designed to stop the flow of gas to the burner head in
o Press in and turn the appropriate control knob anti-clockwise to
o Whilst pressing in the control knob, press and hold down the
You should hold down the ignition button for 20 seconds after
20 second interval, turn the control knob to your
required setting between the maximum and minimum setting
position.
indicate which gas burner it operates.
Pushbutton ignition (B46.1SS/B60.3SS/BT61.1SS)
the large flame symbol.
ignition button, which is located on the control panel.
button until the flame on the burner has lit.
o To regulate the flame, you should continue turning the control
knob anti-clockwise unt
and minimum position.
o
the gas off position.
a match.
P
(B46.1TCSS)
The appliance is fitted with a fl
b
the event of the flame going out.
the large flame symbol.
ignition button, which is located on the control panel.
o
the flame on the burner has lit.
o After this
symbols.
