765562
10
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
10
C. MASTER/SLAVE MODE
Connect the lights in series, the first light controls the other lights when an auto show or sound controlled show is running on
the first light. It’s very good for the instant show mode.
Connect a DMX cable between the 1st light (DMX OUT) to the 2nd light (DMX IN) etc.
Choose option in MENU, select (Master) on the master light (1st light in serie)
Then choose the desired show mode in MENU (ShowMode) (1, 2, 3 or 4
On the 2nd and next lights choose option (Slave 1) running same as the master light, or
option (Slave 2) running against the master light in the MENU
After desired option is chosen, press ENTER button to confirm. The slave lights will now follow the master light
SETTINGS
1. Sound control sensitivity
choose , press ENTER button to confirm. Press UP/DOWN to adjustthe sensitivity value from to . After
chosen, press ENTER button to save.
2. LED display auto off
Choose , press ENTER button to confirm. Press UP/DOWN button to choose (light up) or (light off) mode.
After chosen, press ENTER button to save.
to main menu.
3. LED display inversion
Choose , press ENTER button to confirm, then enter the (inversion), after chosen, press MENU to enter the
mode. After 10seconds or press MENU long time to return to main menu.
4. Pan reverse
Choose , press ENTER button to confirm. Press UP/DOWN button to choose (Pan direction) or (Pan
reverse direction) mode. After chosen, press ENTER button to save.
5. Tilt reverse
Choose , press ENTER button to confirm. Press UP/DOWN button to choose (Tilt direction) Or (Tilt
reverse direction) mode. After chosenpress ENTER button to save.
6. Test mode
Press MENU button to , press ENTER button, the led display will strobe, the light will run built in program, press MENU
to back to main menu.
7. Working time
Press MENU button to , press ENTER button, the led display could show the working time, press MENU back to main
menu.
8. Software version
Press MENU button to , press ENTER buttonthe led display will show the program version, press MENU back to main
menu.
9. Reset
Press MENU button to , press ENTER button, program enter auto reset function.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BeamZ 150.530 - MHL90 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info