1.0 OPERATION GUIDE
GENERAL
The is a universal intelligent lighting controller. It allows the control of 24 fixtures composed of 16 channels each and up to 240
programmable scenes. Six chase banks can contain up to 240 steps composed of the saved scenes and in any order. programs
can be triggered by music, midi, automatically or manually. All chases can be executed at the same time. Controller
On the surface you will find various programming tools such as 16 universal channel sliders, quick access fixture and scene
buttons, and an LED display indicator for easier navigation of controls and menu functions.
SETUP
2.0 PAN AND TILT CHANNELS
Because not all intelligent lighting fixtures are alike or share the same control attributes, the controller allows the user to assign
the wheel the correct pan and tilt channel for every individual fixture.
1) Press and hold PROGRAM & TAPSYNC different DMX
channel. Faders are given a channel buttons together time
to access the number and are labelled on the surface of the
channel assignment mode.
2) Press a fixture button or PAGE SELECT button that
represents the fixture whose faders you would like to
reassign
Notes: All pan/tilt can be reassigned to output on a
different DMX channel. Press AUTO/DEL buttons to delete
the channel assignment mode.
3) Move one fader of 16 channel to select the pan channel.
4) Press the button to select pan / tilt TAPSYNC DISPLAY
5) Move one fader of 16 channel to select the tilt channel.
6) press and hold & buttons to exit and save setting.
PROGRAM & TAPSYNC DISPLAY All LEDs will blink.
Notes: All pan/tilt can be reassigned to output on a
different DMX channel.
2.1 RESETTING THE SYSTEM
Warning:
This will reset the controller to its factory defaults. This will erase all programs and settings.
1) Turn off the unit.
2) Press and hold BANK UP and AUTO/DEL.
3) Turn on power to the unit (while still holding BANK UP and AUTO/DEL).
2.2 COPY FIXTURE
Example: Copying fixture 1 into fixture 2
1) Press and hold Fixture button # 1.
2) While holding button # 1 press fixture button # 2.
3) Release Fixture button # 1 first before releasing Fixture
button # 2.
4) All Fixture LED indicators will flash to confirm successful
copy.
Notes: To save time, you can copy the settings of one
fixture button to another.
2.3 FADE TIME ASSIGN
You can choose whether the board s fade time during scene execution is implemented broadly to all output channels or only to
the Pan & Tilt movement channels. This is relevant because often you will want gobos and colours to change quickly while not
affecting the movement of the light.
1) Turn OFF controller.
2) Hold the BLACKOUT and TAPSYNC DISPLAY buttons
simultaneously.
3) Turn ON controller.
4) Press the TAPSYNC DISPLAY button to toggle between
the two modes. Either all channels (A) or select channel
Pan & Tilt only (P).
5) Press BLACKOUT and TAPSYNC DISPLAY to save
settings. All LEDs will blink to confirm.
Notes: A: ALL Channels
P: Only Pan & Tilt
