UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving, carefully unpack the carton, check the contents to ensure that all parts are present, and
have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts
appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing materials. In
the event that a bubble machine must be returned to the factory, it is important that the bubble machine be returned in the
original factory box and packing.
If the bubble machine has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on
immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached
room temperature.
POWERSUPPLY
On the label on the backside of the bubble machine is indicated on this type of power supply must be connected. Check that the
mains voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The bubble
machine must also be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the bubble machine to a protected circuit (circuit breaker or fuse). Make sure the bubble machine has
an appropriate electrical ground to avoid the risk of electrocution or fire.
INSTALLATION
Attention:
• Be sure that the bubble machine is positioned on a stable, non-slip surface.
• Be sure that no ventilation slots on the product’s housing are blocked.
• Don’t put any objects on the bubble machine.
• Never connect the bubble machine to a dimmer or rheostat.
• Keep the housing of this bubble machine dry at all times.
• Do not spill water or other liquids into reservoir.
• Drain the reservoir before transporting or storing the product.
• Never drink bubble liquid or use it on the inside or outside of a human body. If fluid gets in contact with skin or eyes,
rinse thoroughly with water and call a doctor immediately!
• Keep out of the reach of children.
• For indoor use only.
FILLING RESERVOIR
Step 1: Place the bubble machine on a flat level surface.
Step 2: Fill the reservoir with “Beamz Bubble Liquid” (front of the machine). Make
sure that you do not fill the reservoir above the fill line. Filling above the line will
result in damage to the machine.
Step 3: After the usage, please empty the remaining liquid to prevent damage as
well.
