Bedienungsanleitung Beaufort Belmonte 2017 (Seite 7 von 14) (Englisch)

665846

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

12 13

The mid-drive comodo / Models Monte Maschio & Monte Donne

FUNCTION OVERVIEW

• Use of a two-way serial communication

protocol, simple operation of the display via the

external 5-key keypad.

• Speed display: displaying the real-time speed

as SPEED, the maximum speed as MAXS and the

average speed as AVG.

• km or mile: The user can choose between km

and mile.

• Intelligent battery level indication: With an

optimization algorithm, a stable display of the

battery level is ensured, and the problem of

fluctuant

battery level indication common with other

displays is avoided.

• Automatic light-sensitive lights: The headlight,

taillight and display light will be automatically

turned on/ o depending on lighting conditions.

• 5 levels o display backlighting: Dierent levels

• 5-Level-Support: setting power Levels 1 to 5

• Trip distance indication: The maximum distan-

ce displayed is 99999. Single-trip distances TRIP

or the total distance TOTAL can be displayed.

• Display of error messages

• Walk assistance

• Settings: Various parameters, e.g. mode, wheel

diameter, speed limit etc., can be set on the

computer

via a communication cable. See the setting

• Maintenance warning (this function can be

deactived):

Maintenance warning information is displayed

based on battery charge cycles and riding dis-

tance. The display automatically estimates the

battery life and gives warnings when the number

of charge cycles exceeds the set value. A warning

will also be displayed when the accumulated

total riding distance exceeds the set value.

INFORMATION ON THE DISPLAY

A) Maintenance warning: When there is a need

for maintenance the symbol SERVICE will be dis-

played (riding distance or the number of battery

charge cycles exceed the set value, function can

be deactivated)

B) Menu

C) Speed display: display of the speed, km/h

or mph

D) Speed mode: average speed (AVG km/h),

maximum speed (MAXS km/h)

E) Error display: When a fault is detected the

symbol will be displayed.

F) Distance indication: display of the distance

depending on the setting.

G) Level indication: The chosen level 1–5 will

be displayed; if there is no numeric display, it

means that there is no assistance (by the motor).

If the rider is walking and pushing the e-bike,

“WALK” will be displayed.

H) Walk assistance

I) Headlight indication: only shows when head-

light or backlight are on

J) Distance mode: display of the single-trip

distance TRIP and the total distance TOTAL

K)Battery level: 10-segment battery indication;

the voltage that each segment represents can

be customized

KEY DEFINITIONS

A) up (+)

B) down (-)

C) headlight

D) on/o

E) mode

NORMAL OPERATION

1 On/O Switch

Turn on the device. Press and hold for 2 seconds

to power on the display. Press and hold again

for 2 seconds to power o the display. If the bike

is not used, aer 5 minutes (time can be set) the

display will be automatically turned o.

2 Assist Mode Selection

In the manual gearshi mode, press the +

or – to choose the desired level of support by

the motor.

The lowest level is Level 1, the highest Level 5.

When the display is on, the default mode is Level

1. When there is no numeric mode display, there

is no power assistance.

3 Switch between Distance Mode and Speed

Mode

Briefly press i to switch between distance and

speed. Single-trip distance (TRIP km) / total

distance (TOTAL km) / maximum speed (MAXS

km/h) / average riding speed (AVG km/h) are

displayed in successive order.

4 Headlight/ Display Backlight Switch

Press for 2 seconds. The backlight of the

display as well as the headlight and taillight

will be turned on. Press again for 2 seconds

to power o the display backlight/headlight/

taillight. (If the display is turned on in a dark

environment, the display backlight/ headlight/

taillight will be turned on automatically. If the

display backlight/headlight/taillight are turned

o manually, they also need to be turned on

manually aerwards). There are 5 levels of back-

light brightness that can be selected by the user.

5 Walk Assistance

Press – for 2 seconds. The e-bike enters the

walk assistance mode, and the symbol WALK is

displayed. Once the key – is released, the e-bike

will exit the walk assistance mode.

6 Battery Status Indication

When the battery status is normal, a certain

number of the battery LCD segments as well

as the border light up according to the actual

quantity of charge. If all of the 10 segments will

black out with the border blinking, the battery

needs to be charged immediately.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Beaufort Belmonte 2017 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Beaufort Belmonte 2017

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info