707179
9
Zoom out
Zoom in
Vorherige Seite
1/26
Nächste Seite
5
• Do not apply more than the rated voltage, as marked on the Meter,
between the terminals or between any terminal and earth ground.
• Remove test leads from the Meter before opening the Meter case or
battery cover.
• Never operate the Meter with the battery cover removed or the case
open.
• Never remove the battery cover or open the case of the Meter without
first removing the test leads or the jaws from a live conductor.
• Use caution when working with voltages above 30 V ac rms, 42 V ac
peak, or 60 V dc. These voltages pose a shock hazard.
• Do not attempt to measure any voltage that might exceed the
maximum range of the Meter.
• Use the proper terminals, function, and range for your measurements.
• Do not operate the Meter around explosive gas, vapor, or dust.
• When using probes, keep fingers behind the finger guards.
• When making electrical connections, connect the common test lead
before connecting the live test lead; when disconnecting, disconnect
the live test lead before disconnecting the common test lead.
• Disconnect circuit power and discharge all high-voltage capacitors
before testing resistance, continuity, or diodes.
• Use only 1.5V AAA batteries, properly installed in the Meter case, to
power the Meter.
• To avoid false readings that can lead to electrical shock and injury,
replace the battery as soon as the low battery indicator (
N) appears.
Check Meter operation on a known source before and after use.
• When servicing, use only specified replacement parts.
• Adhere to local and national safety codes. Individual protective
equipment must be used to prevent shock and arc blast injury where
hazardous live conductors are exposed.
• Do not use the Meter if the wear indicator in the jaw opening is not
visible.
• Only use the test lead provided with the Meter or UL Listed Probe
Assembly rated CAT III 600V or better.
UNPACKING AND INSPECTION
Your shipping carton should include:
1 Clamp meter
1 Test leads
1 Alligator clip set (AMP-310 and AMP-320 only)
1 Banana plug K-type thermocouple (AMP-310 and AMP-320 only)
1 1.5 V AAA batteries (installed)
1 User manual
1 Carrying case
If any of these items are damaged or missing, return the complete package
to the place of purchase for an exchange.
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Beha-Amprobe AMP-310 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info