Bedienungsanleitung Behringer A500 (Seite 5 von 11) (Englisch)

660483

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

5 REFERENCE AMPLIFIER A500 User Manual

1. Introduction

The A500 features special circuitry that protects your speakers from transients

during start-up and your amp from overheating. The amp is not put at any risk

even if there is a short on its outputs.

Various operating modes, such as parallel and mono mode, open up dierent

possibilities for eective implementation with the rest of your audio equipment,

leaving little to be desired.

Balanced inputs and outputs

Your BEHRINGER A500 features electronically servo-balanced inputs

(exception:RCA connectors (6) and (7) are intended only for unbalanced

connections). Theautomatic servo function recognizes when unbalanced

jacks are connected and internally adjusts the nominal signal level so that no

dierence in the signal level between inputs and outputs exists (6 dB correction).

◊ This manual first describes the terminology used, so that you fully

understand the A500 and its functions. Please read the manual

carefully and keep it for future reference.

1.1 Before you get started

1.1.1 Shipment

Your A500 was carefully packed at the factory, and the packaging was designed

to protect the unit from rough handling. Nevertheless, we recommend that

you carefully examine the packaging and its contents for any signs of physical

damage that may have occurred during transit.

◊ If the unit is damaged, please do NOT return it to BEHRINGER.

Instead, notify your dealer and the shipping company immediately.

Otherwise, claims for damage or replacement may not be honored.

◊ Always use the original packaging to prevent damage during storage

or transport.

◊ Make sure that no children are left unsupervised with the A500 or

its packaging.

◊ Please ensure proper disposal of all packing materials.

1.1.2 Initial operation

Make sure there is enough space around the unit for cooling. To avoid

overheating, please do not place your amplier near radiators and other

equipment emitting heat.

◊ Before plugging the unit into a power socket, please make sure you

have selected the correct voltage!

The fuse compartment near the power plug socket contains three triangular

markings. Two of these triangles are opposite one another. The voltage

indicated adjacent to these markings is the voltage to which your unit

has been set up, andcan be altered by rotating the fuse compartment by

180°. ATTENTION:Thisdoes not apply to export models that were

manufactured only for use with 120 V, for example!

◊ If you alter the unit’s voltage, you must change the fuse accordingly.

The correct value of the fuse needed can be found in the

chapter “SPECIFICATIONS.”

◊ Faulty fuses must be replaced with fuses of appropriate rating

only! The correct value of the fuses needed can be found in the

chapter “SPECIFICATIONS.”

Power is delivered via the cable enclosed with the unit. All required safety

precautions have been adhered to.

◊ Please keep in mind that all your equipment has to be grounded

at all times. For your own protection, never change or disable the

grounding on your equipment or on the cables! The unit should

always be connected to the mains socket outlet with a protective

earthing connection.

 Attention!

◊ High volume levels can damage your hearing and your speakers.

Please turn down both volume controls to the minimum (all the way

to the left) before you power up the amp. Always make sure you use

appropriate volume levels.

1.1.3 Online registration

Online registration

Please register your new BEHRINGER equipment right after your purchase

by visiting http://behringer.com and read the terms and conditions of our

warrantycarefully.

Should your BEHRINGER product malfunction, it is our intention to have it

repaired as quickly as possible. To arrange for warranty service, please contact

the BEHRINGER retailer from whom the equipment was purchased. Should

your BEHRINGER dealer not be located in your vicinity, you may directly contact

one of our subsidiaries. Corresponding contact information is included in the

original equipment packaging (Global Contact Information/European Contact

Information). Should your country not be listed, please contact the distributor

nearest you. A list of distributors can be found in the support area of our website

(http://behringer.com).

Registering your purchase and equipment with us helps us process your repair

claims more quickly and eciently.

Thank you for your cooperation!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer A500 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer A500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info