Bedienungsanleitung Behringer ADA8000 (Seite 5 von 9) (Englisch)

660490

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

5 ULTRAGAIN PRO-8 DIGITAL ADA8000 User Manual

◊ Please mute your amplifier(s) before activating the phantom

power. Otherwise, switch-on thumps may be audible on your

loudspeakers/headphones.

(9) The POWER switch powers the ADA8000 on. You should always make sure

that the POWER switch is in the “O” position when initially connecting the

unit to the mains.

◊ Please take note: Merely switching the unit off does not mean that

it is fully disconnected from the mains. When not using the unit for

prolonged periods of time, please unplug the unit’s power cord from

the power outlet.

(10)

(11)

Fig. 2.2: Mains supply and fuse compartment

(10) FUSE COMPARTMENT / VOLTAGE SELECTION. Before connecting the unit

to a power outlet, please make sure that the selected voltage matches your

local voltage. When replacing fuses, please make sure that you always use

fuses of the same type. Some units allow for switching between 230 V

und 120 V. Please note: when connecting a unit intended for the European

market to a 120 V power outlet, you must also replace the factory fuse with a

higher-value fuse.

(11) Power is supplied via an IEC connector. The matching cable is provided with

the unit.

(12) (13) (14) (15)

Fig. 2.3: ADAT IN/OUT and wordclock SYNC

(12) All analog input signals are converted into the standard ADAT format and can

be taken at the 8-CHANNEL DIGITAL OUT. This output can be used to feed

an ADAT recorder or any other device featuring an ADAT input. Please note

that a signal present at the Digital In will not be routed to the Digital Out.

(13) At the 8-CHANNEL DIGITAL IN, you can connect an ADAT device. The signal

will automatically be routed to the 8 analog LINE OUT connectors.

(14) Use the WC IN connector to connect devices for the external synchronization

of your ADA8000. This BNC connector is only active, whenthe respective

setting on the rear is made (see (15)). When,forexample, various devices

are interconnected in a digital recordingsystem with, say, adigital mixing

console, all digital units connected have to be synchronized via a shared

wordclock signal.

(15) The setting of this switch depends on the application of your ADA8000. If an

external ADAT recorder is supposed to send the wordclock signal (in this case,

the ADA8000 functions as SLAVE), the switch has to be set to the ADAT IN

position. Please also note the instructions given in the user’s manual of your

ADAT device. When your ADA8000 functions as Master (here, the ADA8000

sends the wordclock signal) please use the switch to select the sampling rate

of your choice (either 44,1 or 48 kHz).

(16) Your ADA8000 features eight LINE OUTs on balanced XLR connectors.

An input signal present at the ADAT IN will automatically be transferred

into eight independent signals and routed to the eight analog

LINEOUTconnectors.

(16)

Fig. 2.4: LINE OUT connectors

3. Applications

Your ADA8000 is an ideal expansion for BEHRINGER’s digital mixing console

DDX3216, which features an optional ADAT interface. Thanks to the ADA8000,

thisdigital mixer can be expanded by eight additional analog inputs and

outputs. Sound cards featuring ADAT INs and OUTs receive eight rst-class analog

inputs and outputs with the ADA8000. What’s more, the eight “Invisible” Mic

Preamps perfectly enable direct recording to digital multitrackers (e.g. ADAT).

Lastbut not least, you can also use the ADA8000’s audio channels to create a live

surroundmix.

4. Audio Connections

You will need many dierent cables for the various applications. The following

illustrations show how these cables should be laid out.

Please use exclusively high-grade cables. The audio connectors of your ADA8000

are electronically balanced and ensure automatic hum and noise reduction.

Needless to say, even devices with unbalanced outputs can be connected to

the balanced in/outputs of your ADA8000. For this purpose, please use either

mono plugs or connect the ring of stereo plugs with the sleeve (when using XLR

connectors, pin 1 and pin 3 have to be bridged).

◊ Please ensure that only qualified personnel install and operate the

ADA8000. During installation and operation the user must have

sufficient electrical contact to earth. Electrostatic charges might affect

the operation of the unit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer ADA8000 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer ADA8000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info