Bedienungsanleitung Behringer VP1800S (Seite 4 von 10) (Englisch)

660580

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

4 EUROLIVE VP2520/VP1800S/VP1520/VP1220F/VP1220 User Manual

1. Before You Get Started

1.1 Shipment

Your VP series loudspeaker was carefully packed at the assembly plant to assure

secure transport. Should the condition of the cardboard box suggest that damage

may have taken place, please inspect the unit immediately and look for physical

indications of damage.

◊ Damaged equipment should NEVER be sent directly to us. Please inform

the dealer from whom you acquired the unit immediately as well

as the transportation company from which you took delivery.

Otherwise, all claims for replacement/repair may be rendered invalid.

◊ Please always use the original packaging to avoid damage due to

storage or shipping.

◊ Never let unsupervised children play with the loudspeaker or

with its packaging.

◊ Please dispose of all packaging materials in an environmentally

friendly fashion.

1.2 Online registration

Please register your new BEHRINGER equipment right after your purchase

by visiting http://behringer.com and read the terms and conditions of our

warranty carefully.

Should your BEHRINGER product malfunction, it is our intention to have it

repaired as quickly as possible. To arrange for warranty service, please contact

the BEHRINGER retailer from whom the equipment was purchased. Should your

BEHRINGER dealer not be located in your vicinity, you may directly contact

one of our subsidiaries. Corresponding contact information is included in the

original equipment packaging (Global Contact Information/European Contact

Information). Should your country not be listed, please contact the distributor

nearest you. A list of distributors can be found in the support area of our

website (http://behringer.com).

Registering your purchase and equipment with us helps us process your

repair claims more quickly and eciently.

Thank you for your cooperation!

1.3 Basic operation

Using the VP series loudspeakers is easy and intuitive. Simply follow these steps

to achieve the best possible sound:

1. Plug the line-level outputs from a sound source such as a mixer or stereo

system into a power amp of appropriate size (see 4.2 Power amp rating).

Make sure the sound source and amplier are turned o.

2. Using ¼" TS or professional locking-style speaker cables, plug the power

amp output into the ¼" or locking-style input on the back of the speaker.

DO NOT use instrument cables (i.e., guitar cords) for this connection!

3. If using a pair of VP loudspeakers, run the amp in stereo operation.

If using just one loudspeaker, mono operation is preferable.

4. If using four or more loudspeakers, there are a few ways to make the

connections. The rst is to use two power amps, one for each pair of

loudspeakers. Another is to connect the rst pair of loudspeakers in normal

stereo operation, then use the output jacks on the back of the loudspeakers to

link the second pair of loudspeakers. This way each channel on the power amp

is driving two loudspeakers. Make sure that the wattage and ohm rating are

appropriate for this situation.

 Caution

Never connect multiple power amps to one loudspeaker. Doing so could cause

the very fabric of reality to unravel, sending the entire universe into oblivion.

Worse yet, it could destroy your ampliers and your loudspeaker.

5. If using the VP1800S subwoofer, it is important to run the source signal into

a crossover before the power amp(s). This will allow you to direct only the

low frequencies to the subwoofer, and the rest of the sound spectrum to the

full-range loudspeakers.

6. Turn the sound source on (mixer, stereo, etc.).

7. Make sure the volume/gain control on the power amp is turned all the

way down, and then turn the power on.

8. Activate the sound source, whether it is playing music from a CD player or

speaking into a microphone, and adjust the levels. Gradually raise the power

amp volume level to desirable level. If distortion occurs, turn the power

amp volume down. Should the problem persist, make sure distortion is not

occurring at the sound source. If you reach the desired volume level by barely

turning up the power amp level/gain, turn the sound source output down to

allow the power amp to push the speakers more.

9. Rock ‘n Roll!

2. Connections

(1)

(2)

Fig. 2.1: Connector panel

(1) The VP series features two locking professional loudspeaker (1) connectors

that are wired in parallel. You can connect one of the connectors to the

output on your power amp and tap into the signal from the amp on

the second connector, in order, for example, to feed this signal into an

additional loudspeaker. The pin designation of the loudspeaker connector

is pins 1+ and 1-. Pins 2+ and 2- are not connected.

front view rear view

Professional speaker connector

(compatible with Neutrik Speakon connectors)

Fig. 2.2: Professional loudspeaker connector

ATTENTION: Never connect the output signals of dierent power

amps to both parallel inputs at the same time. This may permanently

damage your equipment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer VP1800S Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer VP1800S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info