Bedienungsanleitung Behringer X32 CORE (Seite 6 von 21) (Deutsch, Englisch, Französisch, Portugiesisch, Spanisch)

660492

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

10 11X32 CORE DIGITAL RACK MIXER Quick Start Guide

(1) (3) (4) (5) (6) (7) (8) (9) (10) (11)

(2)

(12) (13) (15) (16) (17)(14) (18)

X32 CORE DIGITAL RACK MIXER Controls

(EN) Step 2: Controls

(1) SCENE/SETUP button toggles between

Scenes Recall (green LED) and Channel

Selector mode (LED o) with a short press.

Hold the button to enter Setup Mode

(green LED) and press the button again

to exit Setup Mode. The LED turns red to

indicate access on attached DATA/AUDIO

USB media.

(2) DATA/AUDIO input allows connection of

USB ashdrives for rmware updates,

loading/saving scenes and show les,

and playing back or recording WAV les.

(3) METER displays the input level of the

selected channel.

(4) DISPLAY shows the channel name and icon,

scene name, or setup page information.

(5) CHANNEL TYPE LEDs indicate which type of

channel is currently selected.

(6) SELECT knob navigates the display menus

and edits setup parameters. See the SELECT

Knob Functions section for details.

(7) TALKBACK button engages the external

Talkback mic input on the rear panel.

Details of the routing and operation can be

dened on the monitoring preferences page

of the control software.

(8) USER ASSIGNABLE ENCODERS adjusts

a predened variable parameter in

the software. Function to be dened in the

control software.

(9) USER ASSIGNABLE BUTTONS toggles

a predened on/o parameter in

the software. Function to be dened in the

control software.

(10) PHONES output and level allow audio

to be monitored directly from the unit.

Details of the audio content can be adjusted

in the monitoring preferences page of the

control software. While in Channel Select

Mode, push the Select encoder to toggle

Solo on and o.

(11) POWER button turns the unit on and o.

(12) X-USB interface card allows up to

32 channels of bidirectional audio to be

transmitted to and from a computer.

(13) ETHERNET connector allows full OSC-based

remote control of the X32 CORE.

(14) MIDI IN/OUT allows the unit to send and

receive MIDI commands via standard 5-pin

DIN cables.

(15) ULTRANET connector sends 16 channels of

audio to a P16 monitoring system.

(16) AES50 A and B connectors allow 96 channels

of bidirectional audio for connection to S16

digital snakes or other X32 family products.

The front panel LEDs will light green to

indicate proper sync, light red to indicate

a sync error, and remain unlit when no

connection is present. Shielded CAT-5e

cable should always be used for AES50

connections between X32 and S16 units.

(17) MONITORING OUTPUT jacks allow connection

of monitor speakers via balanced or

unbalanced ¼" cables.

(18) TALKBACK input accepts a dynamic

microphone via ¼" TRS jack. Adjust the gain

with the adjacent TRIM knob.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer X32 CORE Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer X32 CORE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info