Bedienungsanleitung Behringer X32 CORE (Seite 10 von 29) (Englisch)

660492

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

10 X32 CORE DIGITAL RACK MIXER User Manual

4. FX Descriptions

FX Descriptions

Here is a list and brief description of the eects available on the X32 CORE.

WhenStereoand Dual versions of an eect are oered, use the Stereo version

when the left and right signal are to be altered together (e.g. on linked stereo

channels or buses), or Dual when you want to dial dierent settings for the left

and right signal. Assignment and editing of eects parameters is done via the

X32-Edit or X32-Mix applications.

Stereo Precision Limiter

Stereo Precision Limiter allows you to set a precise volume limit,

ensuringdistortion-free, optimal signal integrity. Use X32’s Stereo Precision

Limiter to boost quiet signals or preventing clipping while preserving the level of

“hot”signals.

AUTOGAIN activates an additional long-term gain correction, allowing automatic

gain scaling of varying input level ranges. STEREO LINK applies limiting to both

channels equally when activated. INPUT GAIN provides up to 18 dB of gain to

the input signal prior to limiting. OUTPUT GAIN sets the nal gain level of the

processed signal. SQUEEZE adds compression to the signal to add punch and a

slight distortion depending on the amount you dial in. ATTACK sets the attack

time, ranging from 0.05 mS to 1 mS. RELEASE adjusts the release time from

0.05mS to 1.04 seconds. KNEE adjusts the soft limiting threshold point from hard

limiting (0 dB) to maximum soft limiting (10 dB).

Stereo Delay

Stereo Delay provides independent control of left and right delay (echo)

timesand features high and low pass lters for enhanced tone shaping of the

delayed signals. Use the Stereo Delay to give your mono signals a wide presence

in the stereo eld.

The MIX control lets you blend the source signal and the delayed signal.

TIMEadjusts the master delay time up to three seconds. LO CUT adjusts the low

frequency cut, allowing lower frequencies to remain unaected by the delay.

HI CUT adjusts the high frequency cut, allowing higher frequencies to remain

unaected by the delay. FACTOR L sets the delay on the left channel to rhythmic

fractions of the master delay time. FACTOR R sets the delay on the right channel

to rhythmic fractions of the master delay time. OFFSET LR adds a delay dierence

between the left and right delayed signals. The FEED LO CUT/HI CUT adjusts lters

in the feedback paths. FEED L and FEED R control the amount of feedback for

the left and right channels. MODE sets the feedback mode: Mode ST sets normal

feedback for both channels, X crosses feedbacks between left and right channels.

M creates a mono mix within the feedback chain. 

Triple Delay

Sometimes called a 3-Tap Delay, the Triple Delay provides three delay stages with

independent frequency, gain, and pan controls. Create time-based echo eects

with the Triple Delay to increase the sense of stereo separation.

TIME BASE sets the master delay time, which is also the delay time for the rst

stage. GAIN BASE sets the gain level of the rst stage of the delay. PAN BASE sets

the position of the rst delay stage in the stereo eld. LO CUT sets the frequency

at which the source signal can begin passing through the delay. HI CUT sets the

frequency at which the source signal no longer passes through the delay. X-FEED

indicates that stereo cross-feedback of the delays is active. MONO activates a mono

mix of both channels for the delay input. FEED adjusts the amount of feedback.

FACTOR A controls the amount of delay time in the second stage of the delay.

GAIN A controls the gain level of the second delay stage. PAN A sets the position of

the second delay stage in the stereo eld. FACTOR B controls the amount of delay

time in the third stage of the delay. GAIN B controls the gain level of the third delay

stage. PAN B sets the position of the third gain stage in the stereo eld.

Ambience

Ambience creates a customizable virtual acoustic space in which to place the

elements of a mix. Use Ambience to add warmth and depth without coloring the

direct sound. (Inspired by the Lexicon Ambience Algorithm)

PRE DELAY sets the time before the reverb follows the source signal. DECAYadjusts

the time it takes for the reverb to completely dissipate. SIZEcontrols the room

size emulation. DAMPING controls the high frequency decay within the reverb

tail. DIFFUSE controls the initial echo density. Level sets the volume output of the

aected signal. LO CUT adjusts the low frequency cut, allowing lower frequencies

to remain unaected by the reverb. HI CUT adjusts the high frequency cut,

allowing higher frequencies to remain unaected by the reverb. MOD adjusts the

level of reverb decay modulation. TAIL GAIN adjusts the volume of the reverb tail.

Reverse Reverb

Reverse Reverb takes the trail of a reverb, turns it around, and places it in front

of the sound source. Use the swelling crescendo of the Reverse Reverb to add an

ethereal quality to vocal and snare tracks. (Inspired by the Lexicon 300/480L)

Adjusting the PRE DELAY knob adds up to 200 milliseconds of time before the

reverb follows the source signal. The DECAY knob adjusts the time it takes for

the reverb to completely dissipate. RISE controls how quickly the eect builds

up. DIFF(USION) controls the initial reection density. SPREAD controls how the

reection is distributed through the envelope of the reverb. The LO CUT knob sets

a low frequency beneath which the source signal will not pass through the reverb.

The HiSvFr/HiSvGn knobs adjust a Hi-Shelving lter at the input of the reverb eect.

Behringer X32 CORE Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer X32 CORE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info