Bedienungsanleitung Behringer X32 CORE (Seite 17 von 29) (Englisch)

660492

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

17 X32 CORE DIGITAL RACK MIXER User Manual

5.5 How do I add one of the 8 internal eects

to the sound?

There are two types of eects that are commonly used:

• “Eects Loop” (side chain) style eects, where multiple channels all send

varying amounts of their signal to a common eect, such as a reverb,

delay,or chorus.

• “Insert” style eects that are inserted in to the signal path of a single

channel of audio. Examples would be a graphic EQ, lter, exciter,

ortubeemulator.

To apply an “Eects Loop” style eect:

• Select the “Eects” menu in either the X32-Mix or X-32 Edit software.

Themain screen will show the FX home screen where dierent eects

processors are assigned to the 8 processing slots.

• Adjust rotary encoder #6 to highlight the rst eects processor; it will be

surrounded by an orange outline. You may also click or tap directly on the

desired processor to select.

• Select your desired bus as the source for both the left and right inputs of the

rst eect processor.

• Select a specic eect processor, suchas “Ambience”.

• Adjust FX1L and FX1R up to 0 dB.

• With the desired eect highlighted, select the 'Edit' button beneath the 6th

encoder to adjust the eect parameters.

• Press the Home button again and tab over to the ‘sends’ page. Raisethe

virtual faders for the channels to which you want to add the eect.

The higher you raise the fader, the more of that channel's signal will be sent

to the processor.

To apply an “insert” style eect:

• Select the “Eects” menu in either the X32-Mix or X-32 Edit software.

• As the eects on the left side are also able to handle complex send eects

like reverb, the slots on the right side shall be used for insert eects like

limiter, graphic EQ, etc. You can also use insert eects on the left side,

butthis will limit your use of reverbs and other processor-intensive eects.

• Select one of the eects processors on the right side; it will be surrounded by

an orange outline.

• Select a channel or bus to assign to the processor, then select “Ins” to assign

as an insert eect.

• Select a specic eect processor, such as “precision limiter”.

• Navigate to the Home -> Cong screen.

• Select the specic processor you have applied the eect to, in this case

“InsFX 5L”. Press the encoder to connect the selected insert eect.

• The Precision Limiter is now applied as an insert on the selected channel.

Sending more than one channel through the same insert eect is, of course,

prohibited. There will be a warning when you try to insert an eect slot that

has already been used as an insert on any other channel. Both sides of a dual

type eect can be used as inserts on dierent channels or buses.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer X32 CORE Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer X32 CORE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info